MASW-008566 GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Features • • • • • • • • • • Rev. V1 Functional Schematic Low Voltage Operation: 2.5 V Low Harmonics: < -65 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.65 dB @ 1 GHz High Isolation: 23 dB @ 2 GHz 0.5 micron GaAs PHEMT Process Lead-Free 4mm 16-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0118 Description M/A-COM’s MASW-008566 is a GaAs PHEMT MMIC single pole four throw (SP4T) high power switch in a low cost 4 mm 16-lead PQFN package. The MASW-008566 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size, and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other handset and related applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. Pin Configuration Pin No. Pin Name Description 1 V1 Control 1 2 RF1 RF Port 1 3 GND RF Ground 4 RF2 RF Port 2 5 GND RF Ground 6 V2 Control 2 7 V3 Control 3 8 GND RF Ground 9 RF3 RF Port 3 10 GND RF Ground 11 GND RF Ground 12 RF4 RF Port 4 13 GND RF Ground 14 V4 Control 4 15 GND RF Ground 16 ANT The MASW-008566 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information1,2 Part Number Package MASW-008566-TR3000 3000 piece reel MASW-008566-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 17 Paddle Antenna Port 3 RF Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008566 GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Rev. V1 Electrical Specifications: TA = 25°C, Z0 = 50 Ω 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss5 DC – 1 GHz 1 – 2 GHz 2 - 3 GHz dB dB dB — — — 0.65 0.80 1.00 0.85 1.00 — Isolation DC – 1 GHz 1 – 2 GHz 2 - 3 GHz dB dB dB 27 21 — 29.0 23.0 18.5 — — — Return Loss DC – 3 GHz dB — 20 — IP3 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V dBm — 57 — IP2 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V dBm — 81 — P.1dB VC = 0 V / 2.5 V dBm — 38 — nd 2 Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -80 -71 rd 3 Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -68 -65 Trise, Tfall 10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V µS — 0.2 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF, VC = 0 V / 2.5 V µS — 0.2 — mV — 35 — µA — 10 50 Transients Control Current VC = 0 V / 2.5 V, 34 dBm 4. External DC blocking capacitors are required on all RF ports. 5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz. Absolute Maximum Ratings 6,7 Truth Table 8,9 Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz, 2.5 V Control) +38 dBm Voltage ± 8.5 volts ° ° V1 V2 V3 V4 ANTRF1 ANTRF2 ANTRF3 ANTRF4 1 0 0 0 On Off Off Off 0 1 0 0 Off On Off Off Operating Temperature -40 C to +85 C 0 0 1 0 Off Off On Off Storage Temperature -65°C to +150°C 0 0 0 1 Off Off Off On 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 8. Differential voltage, V (state 1) -V (state 2), must be 2.5 V minimum. 9. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008566 GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Rev. V1 Typical Performance Curves Isolation vs. Temperature Insertion Loss vs. Temperature 1.6 40 +25°C +85°C -40°C 35 1.2 30 0.8 25 +25°C +85°C -40°C 0.4 0.0 0.5 1.0 1.5 2.0 2.5 20 3.0 15 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 Frequency (GHz) 1 GHz 3rd Harmonic Rejection 1 GHz 2nd Harmonic Rejection -50 -50 -60 -60 +25°C +85°C -40°C -70 -70 -80 -80 -90 -90 +25°C +85°C -40°C -100 -100 2.0 2.5 3.0 3.5 4.0 Control Voltage (V) 4.5 5.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008566 GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Rev. V1 Lead-Free 4 mm 16-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.