RoHS Compliant GaAs Broadband SPDT Switch DC - 8.0 GHz Features MASW-007107 V3 Functional Schematic • 802.11a + b/g and MIMO Applications • Test and Measurement and Low/Medium Power Telecommunication Applications up to 8.0 GHz • Broadband Performance: DC - 8.0 GHz • Low Insertion Loss: 0.5 dB from 2.0 - 6.0 GHz • High Isolation: 31 dB from 2.0 - 6.0 GHz • Fast Settling for Low Gate Lag Requirements • Lead-Free 2 mm 8-Lead PDFN Package • 100% Matte Tin Plating over Copper • Halogen-Free “Green” Mold Compound • RoHS Compliant* and 260°C Reflow Compatible Pin 1 Description M/A-COM’s MASW-007107 is a broadband GaAs PHEMT MMIC SPDT switch in a lead-free 2 mm 8lead PDFN package. Typical applications are for WLAN IEEE 802.11a + b/g, and MIMO. Other applications include test equipment requiring ultra fast switching speeds. Designed for low insertion loss, this SPDT switch maintains low loss up to 8.0 GHz. Pin Configuration 3 Pin No. Pin Name Description 1 RF1 RF Output 1 2 N/C No Connection 3 N/C No Connection 4 RF2 RF Output 2 5 V C2 Voltage Control 2 6 N/C No Connection 7 RFC RF Common 8 V C1 Voltage Control 1 9 Paddle4 RF and DC Ground The MASW-007107 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information 3. M/A-COM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1 Part Number Package MASW-007107-TR3000 3000 piece reel MASW-007107-000SMB Sample Test Board (Includes 5 samples) MASW-007107-000DIE2 Separated die on grip ring Absolute Maximum Ratings 5,6 Parameter Absolute Maximum Input Power @ 3 V Control +32 dBm Input Power @ 5 V Control +34 dBm Operating Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. Die quantity varies. 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 8.0 GHz MASW-007107 V3 Electrical Specifications: TA = 25°C, Z0 = 50 Ω, VC = 0 V / 3 V, 8 pF Capacitor 7,8 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 9 2.0 - 6.0 GHz 6.0 - 8.0 GHz dB dB — — 0.50 0.75 0.8 — Isolation 2.4 GHz 5.3 GHz 5.8 GHz 6.0 - 8.0 GHz dB dB dB dB 24 28 25 — 29 33 30 20 — — — — Return Loss DC - 8.0 GHz dB — 16 — Input IP2 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz 5.3 GHz 5.8 GHz dBm dBm dBm — — — 92 83 85 — — — Two Tone, +5 dBm / Tone, 10 MHz Spacing 2.4 GHz (3V) 5.8 GHz (3V) dBm dBm — — 54 49 — — 2.4 GHz (5V) 5.8 GHz (5V) dBm dBm — — 55 51 — — Two Tone, +15 dBm / Tone, 10 MHz Spacing 2.4 GHz (3V) 5.8 GHz (3V) dBm dBm — — 57 54 — — 2.4 GHz (5V) 5.8 GHz (5V) dBm dBm — — 59 58 — — Input P0.1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm dBm dBm — — — 26 26 25 — — — Input P1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm dBm dBm — — — 30.5 29.5 27 — — — Linear Pout 2.4 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 3V 5V 8V dBm dBm dBm — — — 21 27.5 30 — — — 2nd Harmonic 2.4 GHz, PIN = +20 dBm 5.3 GHz, PIN = +20 dBm 5.8 GHz, PIN = +20 dBm dBc dBc dBc — — — -80 -71 -71 — — — 3rd Harmonic 2.4 GHz, PIN = +20 dBm 5.3 GHz, PIN = +20 dBm 5.8 GHz, PIN = +20 dBm dBc dBc dBc — — — -83 -71 -72 — — — T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS — 13 — Ton, Toff 50% control to 90% RF and 50% control to 10% RF nS — 35 — mV — 14 — Input IP3 Transients Control Current |VC| = 3 V µA — 1 5 RON t > 90 mS after OFF to ON Switching (settled) Ω — 2.50 — Gate Lag |ΔRon| between 15 µS and 90 mS after OFF to ON Switching Ω — 0.15 — 7. For positive voltage control, external DC blocking capacitors are required on all RF ports. 8. Electrical minimum and maximum specifications are guaranteed in final package assembly only. 9. Insertion loss can be optimized by varying the DC blocking capacitor value. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 8.0 GHz MASW-007107 V3 Die Bond Pad Layout Die Bond Pad Configuration 7 1 6 2 5 3 4 Application Schematic Pad No. Name Description 1 V C1 Voltage Control 1 2 RF1 RF Output 1 3 GND Ground 4 GND Ground 5 RF2 RF Output 2 6 V C2 Voltage Control 2 7 RFC RF Common Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. C1, C2, C3 = 8pF Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Truth Table 10 Control VC1 Control VC2 RFC– RF1 RFC—RF2 1 0 On Off 0 1 Off On 10. 1 = +2.9 V to +5 V, 0 = 0 V + 0.2 V. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 8.0 GHz MASW-007107 V3 Typical Performance Curves Isolation vs. Frequency Return Loss vs. Frequency 0 50 -5 +25°C -40°C +85°C +25°C -40°C +85°C 40 -10 30 -15 20 -20 10 -25 -30 0 0 2 4 6 8 10 0 2 4 Frequency (GHz) 6 8 10 Frequency (GHz) Insertion Loss vs. Frequency EVM vs. Pout @ 2.4 GHz 2.0 10 +25°C -40°C +85°C 1.5 8 EVM @ 3 V EVM @ 5 V EVM @ 8 V 6 1.0 4 0.5 2 0.0 0 2 4 6 8 10 0 0 Frequency (GHz) 5 10 15 20 25 30 35 Pout (dBm) Lead Free 2 mm 8-lead PDFN † † 4 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.