UG(F,B)10FCT & UG(F,B)10GCT, BYT28(F,B)-300 & BYT28(F,B)-400 Vishay General Semiconductor Dual Common-Cathode Ultrafast Soft Recovery Rectifier FEATURES • Glass passivated chip junction ITO-220AB TO-220AB • Ultrafast recovery time • Low switching losses, high efficiency • Low forward voltage drop 2 PIN 2 PIN 3 CASE 1 1 BYT28, UG10 Series PIN 1 3 2 3 BYT28F, UGF10 Series PIN 1 TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. 2 1 BYT28B, UGB10 Series K PIN 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 2 PIN 3 PIN 1 • High forward surge capability HEATSINK MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 5Ax2 VRRM 300 V, 400 V IFSM 60 A trr 35 ns VF 1.05 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) SYMBOL BYT28-300 UG10FCT BYT28-400 UG10GCT UNIT Maximum repetitive peak reverse voltage VRRM 300 400 V Maximum working reverse voltage VRWM 300 400 V Maximum RMS voltage VRMS 210 280 VDC 300 400 PARAMETER Maximum DC blocking voltage Maximum average forward rectified current at TC = 100 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Document Number: 88552 Revision: 06-Nov-07 total device per diode V IF(AV) 10 5.0 A IFSM 60 A TJ, TSTG - 40 to + 150 °C VAC 1500 V For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 UG(F,B)10FCT & UG(F,B)10GCT, BYT28(F,B)-300 & BYT28(F,B)-400 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 5 A, IF = 10 A IF = 5 A Maximum instantaneous forward voltage per diode (1) Maximum reverse current per diode at VRRM SYMBOL VALUE UNIT TJ = 25 °C TJ = 25 °C TJ = 150 °C VF 1.30 1.40 1.05 V TJ = 25 °C TJ = 100 °C IR 10 200 µA Maximum reverse recovery time per diode IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 35 ns Maximum reverse recovery time per diode IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM trr 50 ns Maximum reverse recovery current per diode IF = 5 A, dI/dt = 50 A/µs, VR = 30 V, TC = 100 °C IRM 3.0 A Maximum stored charge per diode IF = 2 A, dI/dt = 20 A/µs, VR = 30 V, Irr = 0.1 IRM Qrr 50 nC Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYT28 UG10 BYT28F UGF10 BYT28B UGB10 UNIT RθJC 4.5 6.7 4.5 °C/W Typical thermal resistance junction to case per diode ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB BYT28-400-E3/45 PREFERRED P/N 1.80 45 50/tube Tube ITO-220AB BYT28F-400-E3/45 1.95 45 50/tube Tube TO-263AB BYT28B-400-E3/45 1.77 45 50/tube Tube TO-263AB BYT28B-400-E3/81 1.77 81 800/reel Tape and reel TO-220AB BYT28-400HE3/45 (1) 1.80 45 50/tube Tube ITO-220AB BYT28F-400HE3/45 (1) 1.95 45 50/tube Tube TO-263AB BYT28B-400HE3/45 (1) 1.77 45 50/tube Tube TO-263AB BYT28B-400HE3/81 (1) 1.77 81 800/reel Tape and reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88552 Revision: 06-Nov-07 UG(F,B)10FCT & UG(F,B)10GCT, BYT28(F,B)-300 & BYT28(F,B)-400 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Instantaneous Reverse Current (µA) 15 Average Forward Current (A) Resistive or Inductive Load 10 5 TJ = 125 °C 100 TJ = 100 °C 10 1.0 TJ = 25 °C 0.1 0 0 100 50 20 150 Figure 1. Forward Current Derating Curve Stored Charge/Reverse Recovery Time (nC/ns) Peak Forward Surge Current (A) 60 80 TC = 105 °C 8.3 ms Single Half Sine-Wave 10 1 120 100 at 5 A, 50 A/µs 80 at 2 A, 20 A/µs 60 at 5 A, 50 A/µs at 1 A, 100 A/µs 40 20 at 2 A, 20 A/µs 0 1 100 Figure 4. Typical Reverse Characteristics Per Diode 100 25 100 10 50 75 trr Qrr 100 125 Number of Cycles at 60 Hz Junction Temperature (°C) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Reverse Switching Characteristics Per Diode 100 100 10 1.0 Pulse Width = 300 µs 1 % Duty Cycle TJ = 100 °C TJ = 125 °C TJ = 25 °C 0.1 0.01 0.2 Junction Capacitance (pF) Instantaneous Forward Current (A) 40 Percent of Rated Peak Reverse Voltage (%) Case Temperature (°C) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 TJ = 125 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Junction Capacitance Per Diode Document Number: 88552 Revision: 06-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 UG(F,B)10FCT & UG(F,B)10GCT, BYT28(F,B)-300 & BYT28(F,B)-400 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88552 Revision: 06-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1