New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor Dual Common-Cathode Ultrafast Plastic Rectifier TO-220AB FEATURES • Glass passivated chip junction ITO-220AB • Ultrafast recovery time • Soft recovery characteristics • Low switching losses, high efficiency 2 PIN 2 PIN 3 CASE 1 1 UG8xCT Series PIN 1 3 2 3 • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) UGF8xCT Series PIN 1 PIN 2 • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 3 TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 1 UGB8xCT Series PIN 1 TYPICAL APPLICATIONS For use in high voltage and high frequency power factor corrector, freewheeling diodes and secondary dc-to-dc rectification application. K PIN 2 HEATSINK PRIMARY CHARACTERISTICS IF(AV) 4Ax2 VRRM 500 V, 600 V IFSM 65 A trr 25 ns VF 1.50 V TJ max. 150 °C MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG8HCT UG8JCT UNIT Maximum repetitive peak reverse voltage VRRM 500 600 V Maximum working reverse voltage VRWM 400 480 V Maximum RMS voltage VRMS 350 420 V Maximum DC blocking voltage VDC 500 600 V Maximum average forward rectified current IF(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 65 A TJ, TSTG - 55 to + 150 °C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Document Number: 88766 Revision: 09-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 4 A IF = 4 A Maximum DC reverse current per diode at VRWM SYMBOL UG8HCT UG8JCT UNIT TJ = 25 °C TJ = 125 °C VF 1.75 1.50 V TJ = 25 °C TJ = 100 °C TJ = 125 C IR 30 800 4 µA µA mA Maximum reverse recovery time per diode IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 25 ns Maximum reverse recovery time per diode IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 0.1 IRM trr 50 ns Typical softness factor (tb/ta) IF = 4.0 A, dI/dt = 240 A/µs, VR = 400 V, Irr = 0.1 IRM S 0.9 - Maximum reverse recovery current per diode IF = 4.0 A, dI/dt = 32 A/µs, VR = 400 V, TC = 125 °C IRM 3.0 A Maximum reverse recovery current per diode IF = 4.0 A, dI/dt = 240 A/µs, VR = 400 V, TC = 125 °C IRM 8.0 A Peak forward recovery time per diode IF = 4.0 A, dI/dt = 64 A/µs, VF = 1.1 VF max. tfr 500 ns Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case per diode SYMBOL UG8 UGF8 UGB8 UNIT RθJC 3.5 6.0 3.5 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB UG8JCT-E3/45 1.85 45 50/tube Tube ITO-220AB UGF8JCT-E3/45 2.00 45 50/tube Tube TO-263AB UGB8JCT-E3/45 1.35 45 50/tube Tube TO-263AB UGB8JCT-E3/81 1.35 81 800/reel Tape and reel TO-220AB UG8JCTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB UGF8JCTHE3/45 (1) 2.00 45 50/tube Tube TO-263AB UGB8JCTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB UGB8JCTHE3/81 (1) 1.35 81 800/reel Tape and reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88766 Revision: 09-Nov-07 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 000 Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 12 10 UG8JCT, UGB8JCT 8 6 UGF8JCT 4 2 P.C.B. with 7.5 x 7.5 x 0.3 cm Copper Pad 0 25 50 75 100 125 TJ = 100 °C 100 10 TJ = 25 °C 0 150 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics Per Diode 100 100 Junction Capacitance (pF) Peak Forward Surge Current (A) TJ = 125 °C 1 0 80 60 40 20 10 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 0 1 10 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode Stored Charge/Reverse Recovery Time (nC/ns) 100 Instantaneous Forward Current (A) 1000 10 1 0.1 0.01 0.5 TJ = 25 °C max. Pulse Width = 300 µs 1 % Duty Cycle 1.0 1.5 2.0 2.5 140 Qrr Trr IF = 4 A VR = 30 V 120 100 240 A/µs dI/dt = 60 A/µs 80 50 A/µs 50 A/µs 60 A/µs 60 40 240 A/µs 20 0 25 50 75 100 125 150 Instantaneous Forward Voltage (V) Junction Temperature (°C) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Reverse Switching Characteristics Per Diode Document Number: 88766 Revision: 09-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88766 Revision: 09-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1