3.5 kV Kilovac HC-1 Kilovac HC-3 No Load Switching Features: Make & Break Load Switching HC-1 Widely used for RF applications Vacuum dielectric for low leakage current applications Copper contacts for high current capability Not designed for power switching Meets requirements of MIL-R-83725 QPL version available, M83725/5-001 HC-3 Tungsten contacts for long life when power switching Vacuum dielectric for power switching low current loads Kilovac HC-5 Features: Make Only Load Switching Gas-filled for make only power switching SF-6 gas filled for capacitive discharge applications PRODUCT SPECIFICATIONS HC-1 Unit HC-3 HC-5 Nominal, Volts dc 12 26.5 115 Contact Arrangement .......................................................... SPDT SPDT SPDT Pickup, Volts dc, Maximum 8 16 80 Contact Form ........................................................................ C C C Drop-Out, Volts dc 5 5 5 Coil Resistance (Ohms ±10%) Part Number Test Voltage (dc or 60Hz) ................................................... kV Peak Rated Operating Voltage ..................................................... kV Peak COIL DATA 3.5 3.5 3.5 2.5 MHz ........................................................................... 2.5 - - 16 MHz ............................................................................ 2 - - 32 MHz ............................................................................ 1.5 - - dc or 60 Hz ..................................................................... 25 18 8 2.5 MHz ........................................................................... 14 - - 16 MHz ............................................................................ 9 - - 32 MHz ............................................................................ 7 - - Coil Hi-Pot (V RMS, 60 Hz) ........................................... 500 500 500 Between Open Contacts ................................................. 2 - - Open Contacts to Ground .............................................. 2.5 - - Contact Capacitance ............................................................ 80 1 - 10 5 - 50 335 6000 Ratings listed are for 25°C, sea level conditions dc or 60 Hz ..................................................................... Continuous Carry Current , Maximum ............................... .5 - 5 Amps PART NUMBER SELECTION Sample Part No. HC Model 1 3 5 Coil Voltage Blank = 26.5Vdc /12Vdc = 12Vdc /115Vdc = 115Vdc 1 /12Vdc pF Contact Resistance, Maximum ........................................... Ohms 0.01 0.02 0.50* Operate Time, Maximum ..................................................... ms 6 6 6 Release Time, Maximum ..................................................... ms 6 6 6 Shock, 11 ms 1/2 Sine ........................................................ G's Peak 50 50 50 Vibration, 10 Gs Peak ......................................................... Hz 55-2000 55-2000 55-2000 Operating Ambient Temperature Range ............................ o C -55 to +125 -55 to +125 -55 to +125 Mechanical Life (Operations x 106) .................................... cycles 2 2 1 Weight, Nominal .................................................................. oz 1 1 1 * Contact resistance for gas-filled relays is measured at 28 Vdc, 1 amp 25 CII Technologies / P.O. Box 4422 / Santa Barbara, CA 93140 / ph 805.684.4560 / fax 805.684.9679 / e-mail [email protected] / website www.ciitech.com