TX n AUTOMOTIVE RELAY Features Single coil type (TX1) and twin coil type (TX2) for bi -directional control of automobile motors High power, miniature design 30A, 16VDC switching current capacity Sealed for immersion cleaning UL E1555 n Coil Rating (All Coil Voltages 12VDC only) @ 20°C Part Number Coil Resistance (W ± 10%) TX1-8 TX1-9 TX1-10 T X2-8 TX2-9 TX2-10 n 200 250 320 200 250 320 Rated Power (W) 0.72 0.58 0 .45 0.72 0.58 0.45 Pick-Up Voltage (VDC) 6.0 6.75 7.5 6.0 6.75 7.5 Drop-Out Voltage (VDC) 0.8 0.9 1.0 0.8 0.9 1.0 Specifications Contact Arrangement Contact Material Rated Load Max. Switching Current Max. Carrrying Current Max. Switching Power Contact Resistance Insulation Resistance Dielectric Strength DPDT (1 Form C) AgSnO2 25A Motor Load 14 VDC 30A 30A @ 200 C within 5 minutes 60W (DC) ; 125VA (AC) Max. 50m Ohm (@ 6VDC 1A voltage drop method) Min. 100M Ohm (@ 500VDC) 1000VAC for 1 minute between open contacts 1000VAC for 1 minute between coil & contacts Max. 10ms (@ rated voltage) Max. 10ms (@ rated voltage) -40°C ~ +85°C 85% RH 10 to 400 Hz 4.4G Min. 10G ( Shock wave 11ms) 10 x 10 operations (@ 300 ops/min) Operate Time Release Time Operating Ambient Temp. Ambient Humidity Vibration Resistance Shock Resistance Mechanical Life Electrical 0.1 x 106 ops (ON: 5 sec / OFF: 25 sec) 14VDC 25A motor load Weight 6 TX1: Approx. 8g TX2: Approx. 15g 65 SHARK RIVER ROAD, NEPTUNE, NEW JERSEY 07753-7423 PH (732) 922-6333 FX (732) 922-6363 E-mail: [email protected] n Characteristics n Dimensions n How to order TX2 - 8 X F Z TX1: 1 Form C ; TX2: 2x1 Form C Coil: 8=200ohm; 9=250ohm ; 10=320ohm Contact Material: Blank=Standard ; X=Special Coil Terminal: Blank= 3 pins ; F= 4 pins Contact Terminals: Blank=Std (Common NC) Z= NC contact is independent 65 SHARK RIVER ROAD, NEPTUNE, NEW JERSEY 07753-7423 PH (732) 922-6333 FX (732) 922-6363 E-mail: [email protected]