PD10-0042-S Two-Way In-Phase Power Divider 10-2000 MHz Features • • • • • FP-2 Space Qualified version of DS-313 Designed to meet the Stringent Reliability Standards of Space Hardware 50 Ohms Nominal Impedance 28 dB Midband Isolation 1.2:1 Midband VSWR 0.312 MIN TYP (7.9 MIN) PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 PLACES 1 2 3 4 0.385 ±0.020 (9.8 ±0.5) 5 6 7 8 Description M/A-COM’s PD10-0042-S is a Two-Way In-Phase Power Divider designed to operate between 10 and 2000 MHz. 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) Absolute Maximum Ratings1 Parameter Max. Input Power Operating Temperature Storage Temperature 0.350 (8.9) 0.051 (12.9 ±0.5)) Absolute Maximum 250 milliWatt Max. -30°C to +85°C -65°C to +125°C 0.150 MAX (3.8 MAX) 0.060 (1.5) 1. Operation of this device above any one of these parameters may cause permanent damage. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS Electrical Specifications, TA = +25°C Parameter Insertion Loss Isolation Amplitude Balance Phase Balance VSWR Frequency Units Min. Max. 10-1000 MHz dB - 1.1 1001-1500 MHz dB - 1.3 1501-2000 MHz dB - -1.8 20-1000 MHz dB 23 - 10-1500 MHz dB 18 - 1501-2000 MHz dB 12 - 20-1000 MHz dB - .3 10-1500 MHz dB - .4 1500-2000 MHz dB - .6 20-1000 MHz - - 4° 10-1500 MHz - - 6° 1500-2000 MHz - - 8° 20-1000 MHz - - 1.5:1 10-1500 MHz - - 1.6:1 1501-2000 MHz - - 1.8:1 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 2.0 1