DS56-0005 Low Cost Six-Way SMT Power Divider 824 - 960 MHz Features • • • • • • SOIC-16 Small Size, Low Profile Superior Repeatability (Lot-to-lot Variation) Industry Standard SOIC-16 SMT Plastic Package Typical Isolation 25dB Typical Insertion Loss 0.8dB Low Cost Description M/A-COM’s DS56-0005 is an IC-based monolithic power divider in a low cost SOIC-16 plastic package. This 6-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in Tape and Reel. The DS56-0005 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliabilty. Ordering Information Part Number Package DS56-0005 SOIC-16 Lead Plastic Package DS56-0005-TR Forward Tape and Reel1 DS56-0005-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Parameter Units Min Typ Max Insertion Loss above 7.8dB dB — 0.8 1.2 Isolation dB 20 25 — — — — — 1.4 : 1 1.3 : 1 1.8 : 1 1.5 : 1 dB — 0.5 0.9 ° — 4 8 VSWR Input Output Amplitude Balance Phase Balance 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.0 1 Low Cost Six-Way SMT Power Divider, 824 - 960 MHz Absolute Maximum Ratings1 Parameter DS56-0005 Functional Diagram Absolute Maximum Input Power2 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W Maximum. Typical Performance @ +25°C 0.20 Amplitude Imbalance Insertion Loss -0.30 -0.32 0.10 -0.34 0.00 -0.36 -0.38 dB dB -0.10 -0.20 -0.40 -0.42 -0.30 -0.44 -0.40 -0.46 -0.50 -0.48 -0.60 824.00 843.43 862.86 882.29 901.71 921.14 940.57 -0.50 824.00 960.00 843.43 862.86 882.29 Frequency (MHz) -10.0 901.71 921.14 940.57 960.00 Frequency (MHz) Isolation 2.50 Phase Imbalance -12.0 2.00 Degrees -14.0 -16.0 dB -18.0 -20.0 -22.0 -24.0 -26.0 1.50 1.00 0.50 -28.0 -30.0 824.00 843.43 862.86 882.29 901.71 921.14 940.57 960.00 0.00 824.00 843.43 862.86 Frequency (MHz) 901.71 921.14 940.57 960.00 Output VSWR Input VSWR 1.80 1.70 1.60 1.50 1.40 1.30 1.20 1.10 1.00 0.90 0.80 824.00 882.29 Frequency (MHz) 1.60 1.50 1.40 1.30 1.20 1.10 1.00 0.90 843.43 862.86 882.29 901.71 921.14 940.57 960.00 Frequency (MHz) Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 0.80 824.00 843.43 862.86 882.29 901.71 921.14 940.57 960.00 Frequency (MHz) V 3.0 2