SPDT T/R Switch 5.0 - 6.0 GHz MA0S506AJ V2 Features • • • • • • Functional Schematic Ideal for 802.11a Hiperlan Applications Positive Control Voltages +32 dB One dB Compression Point Fast Switching Speed No External Components Required MSOP-8 Package Description The MA0S506AJ is a medium power 5.0-6.0 SPDT switch. Typical Applications include the transmit/ receive functions in 802.11a and Hiperlan, and fixed wireless access applications. All RF impedances are 50 Ω, and all RF ports are internally DC blocked. The switch operates over a typical voltage range of 2.7 to 5.5 volts. The MA0S506AJ is offered in a MSOP-8 package. The MA0S506AJ is fabricated using M/A-COM’s 0.5 micron MESFET process for a low single supply voltage, high linearity, and excellent reliability. Ordering Information 1 Part Number Package MA0S506AJ-R7 7 inch, 1000 piece reel MA0S506AJ-R13 13 inch, 3000 piece reel MA0S506AJ-SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 1 V1 8 RF1 V2 GND RFC GND VDD RF2 Pin Configuration Pin No. Pin Name Description 1 V1 Control Voltage 1 2 V2 Control Voltage 2 3 RFC RF Common Port 4 VDD Supply Voltage 5 RF2 RF Port 2 6 GND Ground 7 GND Ground 8 RF1 RF Port 1 Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Max Input Power +33 dBm Control Voltages +8.0 volts Supply Voltages +8.0 volts Operating Temperature -40°C to +100°C Channel Temperature +150°C Storage Temperature -40°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this devise. 3. M/A-COM does not recommend sustained operation near these survivability limits. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. SPDT T/R Switch 5.0 - 6.0 GHz MA0S506AJ V2 Electrical Specifications: TA = 25°C, Z0 = 50 Ω 4 Parameter Test Conditions Unit Min. Typ. Max. Insertion Loss dB — 1.4 1.8 Isolation dB 25 28 — Return Loss dB — 9 — TRISE, TFALL TON, TOFF 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF nS nS — — 10 25 — — 1 dB Compression V1/V2 = 0/3 V, VDD = 3 V V1/V2 = 0/5 V, VDD = 5 V dBm dBm — — 32 35 — — dBm — 44 — Third Order Intercept 4. Unless otherwise specified, input power is -10 dBm, VDD is +5 V, control voltages are 0/+5 V, and test frequency is 5.775 GHz Switch Logic Table 5,6 Handling Procedures Insertion Loss Path Isolated Path V1 V2 RF1/RFC RF2/RFC 1 0 RF2/RFC RF1/RFC 0 1 5. “0” = 0 +/- 0.2 volts 6. “1” = +2.7 to +5 volts, equal to VDD Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Application Schematic Board material: Rogers Duroid RO4350, 20 mil thick dielectric (er=3.48). All RF traces are 50 ohms (43mils wide). 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. SPDT T/R Switch 5.0 - 6.0 GHz MA0S506AJ V2 Typical Performance Insertion Loss vs. Frequency Insertion Loss Variation vs. Frequency 0 Variation (dB/ o C) Insertion Loss (dB) 0.0 -0.5 -1.0 -1.5 -2.0 -0.001 -0.002 -0.003 -0.004 -2.5 5.0 5.0 5.2 5.4 5.6 5.8 5.2 6.0 5.4 5.6 5.8 6.0 Frequency (GHz) Frequency (GHz) Return Loss vs. Frequency Isolation vs. Frequency 0 Return Loss (dB) Isolation (dB) -10 -20 -30 -40 -50 -2 -4 -6 -8 -10 -12 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) MSOP-8 Package† † 3 Meets JEDEC moisture sensitivity level 1 requirements. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.