TOKEN TPSPA High Saturation Power Inductors SMT High Saturation Power Inductors Token Power Inductor Enhances Low DCR High Saturation Current With Up To 1MHz High Frequency Preview Token Electronics has added two new ranges of low-profile wirewound chip inductors, TPSME3010 and TPSME3015, for use in DC-DC converter applications to increase flexibility of maximum height measurements with extended electrical characteristics. The new TPSME series is designed to provide a good balance of height and performance within chip power inductor offering. The TPSME3010 Series was developed to have a low profile height of 1.0mm. The TPSME3015 Series was developed to have a medium range maximum height of 1.5mm. This two TPSME family enables flexibility and efficiency. Both winding chip coils the TPSME3010 series and TPSME3015 series of inductors offer low DC resistance and large rated current. This is vital for DC-DC converter applications as it prevents energy dissipation from the chip inductor, improving the converter’s overall efficiency. The new ranges deliver a good size/performance ratio with low DC resistances of 0.065ohm (TPSME3010) and 0.040ohm (TPSME3015). Their low-profile 1212 size packaging is designed to save space, measuring 3 x 3 x 1mm (TPSME3010) or 3 x 3 x 1.5mm (TPSME3015). A wide range of inductances is also available: 1.0μH to 47μH for the TPSME3010 series and 1.0μH to 100μH for the TPSME3015 series. The parts come with high rated currents, up to 2.35A, and feature magnetic shielding as standard. Operating temperature range is -40°C to +105°C. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements,please contact our sales for more information. Features : - Low Profile: 3.0mm ~ 6.5mm. - Low DCR, SMT Power Inductor. - High Frequency (up to 1MHz). - For Large Current Use: 10 amp ~ 60 amp. Applications : - Inductor for general purpose use. - DC-DC converter or VRM applications. - Thin type on-board power supply module for exchanger. - Notebook, Laptop Computer, Graphic Card, VGA Module. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 09 TOKEN TPSPA High Saturation Power Inductors Dimensions & Configurations A D C E B Type TPSPA0603 TPSPA0603A TPSPA1040 TPSPA1040A TPSPA1040B TPSPA1040C TPSPA1235 TPSPA1240 TPSPA1250 TPSPA1265 A 6.8max 6.8max 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5 10.5 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 12.8 ± 0.5 B 7.1 ± 0.3 7.1 ± 0.3 11.5 ± 1.0 11.5 ± 1.0 11.5 ± 1.0 11.5 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 13.2 ± 1.0 C 3.0 max. 3.0 max. 4.0 max. 4.0 max. 4.0 max. 4.0 max. 3.5 max. 4.0 max. 5.0 max. 6.5 max. D 3.0 ± 0.3 3.0 ± 0.3 3.0 ref. 2.5 ref. 3.0 ref. 3.0 ref. 3.8 ref. 3.8 ref. 3.8 ref. 3.8 ref. E 1.6 ± 0.3 1.6 ± 0.3 2.3 ref. 2.3 ref. 2.3 ref. 2.3 ref. 2.5 ref. 2.5 ref. 2.5 ref. 2.5 ref. (TPSPA0603) Electrical Characteristics Part Number L0 Inductance (µH) ±20% @0A TPSPA-0603-R10M TPSPA-0603-R15M TPSPA-0603-R20M TPSPA-0603-R22M TPSPA-0603-R33M TPSPA-0603-R47M TPSPA-0603-R68M TPSPA-0603-R82M TPSPA-0603-1R0M TPSPA-0603-1R5M TPSPA-0603-2R2M TPSPA-0603-3R3M TPSPA-0603-4R7M TPSPA-0603-6R8M TPSPA-0603-8R2M TPSPA-0603-100M 0.10 0.15 0.20 0.22 0.33 0.47 0.68 0.82 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 DCR (mΩ) (Typical) (Max) 1.5 1.7 1.9 2.5 2.4 3.0 2.5 2.8 3.5 3.9 4.0 4.2 5.0 5.5 6.7 8.0 9 10.0 14 15.0 18 20.0 28 30.0 37 40.0 54 60.0 64 68.0 102 105.0 Heat Rating Current Idc (Amp) Typical 32.5 26 24 23 20 17.5 15.5 13 11 9 8 6 5.5 4.5 4 3 Saturation Current Isat (Amp) Typical 60 52 41 40 30 26 25 24 22 18 14 13.5 10 8 7.5 7 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 02 of 09 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors (TPSPA0603A) Electrical Characteristics Part Number L0 Inductance (µH) ±20% @0A TPSPA-0603A-1R0M TPSPA-0603A-1R5M TPSPA-0603A-2R2M TPSPA-0603A-3R3M TPSPA-0603A-4R7M TPSPA-0603A-6R8M TPSPA-0603A-8R2M TPSPA-0603A-100M TPSPA-0603A-220M 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 22.0 DCR (mΩ) (Typical) (Max) 7.6 8.0 11.7 12.5 15.7 16.5 24.8 26.0 31.8 33.4 44.6 46.8 52.3 54.9 67.8 71.2 128.9 135.0 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 12.5 10.5 9.0 7.0 6.0 5.5 5.0 4.0 2.9 9.5 8.0 7.0 6.5 4.0 4.0 4.0 3.5 2.5 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 44 38 35 32 30 25 25 20 15 14 44 38 35 32 30 30 25 20 15 14 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. (TPSPA1040) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1040-R19M TPSPA-1040-R24M TPSPA-1040-R36M TPSPA-1040-R47M TPSPA-1040-R56M TPSPA-1040-R68M TPSPA-1040-R78M TPSPA-1040-1R0M TPSPA-1040-1R8M TPSPA-1040-2R0M 0.19 0.24 0.36 0.47 0.56 0.68 0.78 1.0 1.8 2.0 DCR (mΩ) (Typical) (Max) 0.50 0.60 0.70 0.80 0.85 0.95 1.20 1.40 1.25 1.35 1.60 1.80 1.60 1.70 2.20 2.50 4.50 5.00 5.20 5.80 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 09 TOKEN TPSPA High Saturation Power Inductors (TPSPA1040B) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1040B-R19M TPSPA-1040B-R36M TPSPA-1040B-R56M TPSPA-1040B-1R0M TPSPA-1040B-1R5M TPSPA-1040B-2R2M TPSPA-1040B-3R3M TPSPA-1040B-4R7M TPSPA-1040B-5R6M TPSPA-1040B-6R8M TPSPA-1040B-8R2M TPSPA-1040B-100M 0.19 0.36 0.56 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.875 0.95 1.30 1.40 1.70 1.80 3.70 4.10 5.30 5.80 8.20 9.00 10.80 11.80 15.00 16.50 17.60 19.30 21.20 23.30 31.00 34.00 33.20 36.50 Heat Rating Current Idc (Amp) Typical 40 31.5 27.5 17.5 15 12 10 9.5 8.5 8.0 7.0 6.8 Saturation Current Isat (Amp) Typical 90 60 49 36 27.5 25.5 18.6 17 16 13.5 12.5 12 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. (TPSPA1040C) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1040C-R19M TPSPA-1040C-R24M TPSPA-1040C-R36M TPSPA-1040C-R47M TPSPA-1040C-R56M TPSPA-1040C-R78M TPSPA-1040C-1R0M TPSPA-1040C-1R8M TPSPA-1040C-2R0M TPSPA-1040C-4R7M TPSPA-1040C-6R8M TPSPA-1040C-100M TPSPA-1040C-150M TPSPA-1040C-220M TPSPA-1040C-330M TPSPA-1040C-470M TPSPA-1040C-101M 0.19 0.24 0.36 0.47 0.56 0.78 1.0 1.8 2.0 4.7 6.8 10 15 22 33 47 100 DCR (mΩ) (Typical) (Max) 0.70 0.80 0.85 0.95 1.05 1.15 1.53 1.68 1.60 1.80 1.80 1.90 2.30 2.50 4.50 5.00 5.20 5.80 12.90 14.20 17.50 19.30 27.80 30.50 40.90 45.00 60.40 66.00 87.50 94.50 132.0 145.0 249.0 270.0 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 40.0 33 32 30 32 27 25 17 16 9.5 9.0 7.5 6.25 5.0 4.4 4.0 3.00 46 44 30 30 22 22 20 16 14 7.6 7.5 7.1 6.0 4.5 4.0 3.0 2.25 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 04 of 09 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors (TPSPA1235) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1235-R10M TPSPA-1235-R15M TPSPA-1235-R22M TPSPA-1235-R33M TPSPA-1235-R47M TPSPA-1235-R60M TPSPA-1235-R68M TPSPA-1235-R82M TPSPA-1235-1R0M TPSPA-1235-1R5M TPSPA-1235-1R8M TPSPA-1235-2R2M TPSPA-1235-3R3M TPSPA-1235-4R7M TPSPA-1235-5R6M TPSPA-1235-6R8M TPSPA-1235-8R2M TPSPA-1235-100M 0.10 0.15 0.22 0.33 0.47 0.60 0.68 0.82 1.0 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.8 0.96 1.0 1.2 1.1 1.3 1.3 1.5 1.6 2.0 1.8 2.2 2.3 2.5 2.6 3.0 3.3 3.5 5.1 5.5 6.5 7.0 7.2 8.0 11.0 12.0 14.3 15.0 17.1 18.0 19.8 22.0 24.8 28.0 30.4 34.0 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 43 41 38.5 36.5 32 29 28 25 24 19 16.5 16 12 10 9.5 9 8.5 7 84 75 65 62 55 51 49 44 40 35 30 29 27 24 19 18 16 14 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 09 TOKEN TPSPA High Saturation Power Inductors (TPSPA1240) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1240-R10M TPSPA-1240-R22M TPSPA-1240-R33M TPSPA-1240-R47M TPSPA-1240-R60M TPSPA-1240-R68M TPSPA-1240-R82M TPSPA-1240-0R9M TPSPA-1240-1R0M TPSPA-1240-1R2M TPSPA-1240-1R5M TPSPA-1240-1R8M TPSPA-1240-2R2M TPSPA-1240-3R3M TPSPA-1240-4R7M 0.10 0.22 s0.33 0.47 0.60 0.68 0.82 0.9 1.0 1.2 1.5 1.8 2.2 3.3 4.7 DCR (mΩ) (Typical) (Max) 0.90 1.10 1.20 1.40 1.30 1.50 1.40 1.90 2.00 2.30 2.10 2.50 2.70 3.10 3.00 3.50 3.00 3.70 3.00 3.70 5.50 6.00 6.40 7.60 6.40 7.60 7.50 8.40 10.50 12.00 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 43 41 38 32 30 28 25 24 24 20 19 16 16 14 11 75 70 60 55 50 46 44 40 38 25 30 26 22 20 15 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 06 of 09 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors (TPSPA1250) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1250-R10M TPSPA-1250-R22M TPSPA-1250-R33M TPSPA-1250-R47M TPSPA-1250-R56M TPSPA-1250-R68M TPSPA-1250-R82M TPSPA-1250-1R0M TPSPA-1250-1R2M TPSPA-1250-1R5M TPSPA-1250-1R8M TPSPA-1250-2R2M TPSPA-1250-3R3M TPSPA-1250-4R7M TPSPA-1250-5R6M TPSPA-1250-6R8M TPSPA-1250-7R8M TPSPA-1250-8R2M TPSPA-1250-100M 0.10 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 7.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.53 0.60 0.64 0.80 0.85 1.10 1.10 1.30 1.30 1.50 1.50 1.70 2.00 2.30 2.10 2.50 2.80 3.50 3.40 4.10 4.20 4.90 4.60 5.50 7.70 9.20 12.8 15.0 14.0 16.5 15.4 18.5 17.2 20.5 18.9 22.5 21.4 25.5 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 55 51 42 38 36 34 31 29 25 23 19 20 15 12 11.5 11 10 9.5 9 118 110 80 65 55 54 53 50 49 48 40 32 32 27 22 21 18 18 16 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 07 of 09 TOKEN TPSPA High Saturation Power Inductors (TPSPA1265) Electrical Characteristics Part Numbers L0 Inductance (µH) ±20% @0A TPSPA-1265-R10M TPSPA-1265-R15M TPSPA-1265-R22M TPSPA-1265-R30M TPSPA-1265-R33M TPSPA-1265-R40M TPSPA-1265-R47M TPSPA-1265-R56M TPSPA-1265-R68M TPSPA-1265-R82M TPSPA-1265-1R0M TPSPA-1265-1R2M TPSPA-1265-1R5M TPSPA-1265-1R8M TPSPA-1265-2R2M TPSPA-1265-3R3M TPSPA-1265-4R7M TPSPA-1265-5R6M TPSPA-1265-6R8M TPSPA-1265-8R2M TPSPA-1265-100M 0.10 0.15 0.22 0.30 0.33 0.40 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 DCR (mΩ) (Typical) (Max) 0.47 0.50 0.53 0.60 0.63 0.70 0.70 0.80 0.83 0.90 0.90 1.00 1.00 1.20 1.20 1.40 1.40 1.60 1.60 1.90 1.70 2.00 2.10 2.50 2.50 3.00 2.80 3.20 3.50 4.20 5.70 6.80 9.30 11.2 9.30 10.0 13.1 14.0 14.5 15.5 15.8 16.8 Heat Rating Current Idc (Amp) Typical Saturation Current Isat (Amp) Typical 60 55 53 48 46 44 41 37 35 33 32 30 27 24 22 18 13.5 13.5 11.5 10.5 10 120 118 112 72 65 64 63 62 60 50 49 48 45 41 40 35 30 26.5 16.5 16.0 15.5 Note: All test Data is referenced to 25°C ambient. Typical Heat Rating DC Current would cause an approximately ΔT of 40°C. Typical Saturation DC Current would cause Lo to drop approximately 20%. Operating Temperature Range: -25°C to +125°C. 08 of 09 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSPA High Saturation Power Inductors Reel Quantity Reel Q’ty(Pcs) 2,000 5Reel / Box Q’ty(Pcs) Size m/m 10,000 182×182×80 Size m/m 180Ø Q’ty(Pcs) 60,000 6Box / Carton Size m/m 540×210×205 How to Order TPSPA 1265 R10 M Part Number: TPSPA Size (L×M)(mm) Inductance Code Size Code Inductance 0603 0603A 1040 1040A 1040B 1040C 1235 1240 1250 1265 6.8×7.1 6.8×7.1 10.5×11.5 10.5×11.5 10.5×11.5 10.5×11.5 12.8×13.2 12.8×13.2 12.8×13.2 12.8×13.2 R10 1R0 0.10µH 1.00µH Tolerance Code M Tolerance 20% Back to 1st Page - SMT Power High Saturation Inductors (TPSPA) Version 2010 http://www.token.com.tw/ rfq token.com.tw 09 of 09