MA-COM ETC4-1-8TR

ETC4-1-8
E-Series RF 1:4 Transformer
20 – 350 MHz
V1
Features
•
•
•
•
SM - 22 Package
1:4 Impedance Ratio
CT on Secondary
Surface Mount
Tape and reel packaging available
Description
M/A-COM’s ETC4-1-8 is a 4:1 RF transmission line
step-up transformer in a low cost, surface mount
package. Ideally suited for high volume cellular and
wireless applications. Typical applications include
single to balanced mode conversion and impedance
matching. Parts are packaged in tape & reel.
Electrical Specifications: TA = 25°C, Z0 = 50Ω 1
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
RF Frequency
—
20 - 350
MHz
—
—
—
Insertion Loss
FL—fU
20 - 350
50 - 200
dB
—
—
—
—
3.0
2.0
Amplitude Unbalance
FL—fU
20 - 350
dB
—
—
0.5
Phase Unbalance
FL—fU
20 - 350
Degrees
—
—
5
Absolute Maximum Ratings 1
Ordering Information
Parameter
Absolute Maximum
Part Number
Package
RF Power
250 mW
ETC4-1-8TR
Tape and Reel (2000 piece Reel)
DC Current
100 mA
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to
Commitment to produce in volume is not guaranteed.
the product(s) or information contained herein without notice.
ETC4-1-8
E-Series RF 1:4 Transformer
20 – 350 MHz
Pin Configuration
V1
Schematic
Pin No.
Function
1
Secondary
2
Secondary CT
3
Secondary Dot
4
Primary Dot
5
Primary
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to
Commitment to produce in volume is not guaranteed.
the product(s) or information contained herein without notice.