ETC16-1T-2TR E-Series RF 1:16 Transformer 5-40 MHz M/A-COM Products Advanced - Rev. V2 Product Image Features • • • • • 1:16 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available 260°C Reflow Compatible Description M/A-COM’s ETC16-1T-2TR is a 1:16 RF transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. The ETC16-1T-2TR is available in a SM-22 surface mount package. Parts are packaged in tape & reel. Ordering Information Part Number Package ETC16-1T-2TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Pin Configuration Units Min Typ Max Pin No. Function 1 Secondary RF Frequency — 5 - 40 MHz — — — 2 Secondary CT Insertion Loss — 5 - 40 22 dB dB — — 1.0 0.8 3 Secondary Dot Primary Dot Primary Amplitude Imbalance — 5 - 40 dB — — 0.3 4 Phase Imbalance — 5 - 40 Degrees — — 3 5 Schematic Absolute Maximum Ratings Parameter Absolute Maximum RF Power 250 mW DC Current 240 mA2 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. ETC16-1T-2TR E-Series RF 1:16 Transformer 5-40 MHz M/A-COM Products Advanced - Rev. V2 SM - 22 Package Typical Performance Curves at +25°C dB Insertion Loss 0 -0.2 -0.4 -0.6 -0.8 5 10 15 20 25 30 35 40 MHz WEIGHT: 1 gram (0.04 oz.) max Amplitude Balance dB 0.04 0.02 0 -0.02 5 -0.04 10 15 20 25 30 35 40 -0.06 -0.08 ∗ MHz Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Degree Phase Balance -179.4 -179.5 -179.6 -179.7 -179.8 -179.9 -180 5 10 15 20 25 30 35 40 35 40 MHz Input Return Loss 0 dB -10 -20 -30 -40 5 10 15 20 25 30 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.