SF1001 thru SF1007 SUPERFAST RECOVERY RECTIFIER VOLTAGE - 50 TO 600 VOLTS CURRENT - 10 AMPERES TO-220AC FEATURES MECHANICAL DATA Low forward voltage drop High Current Capability High reliability High surge Current Capability Good for switching mode application High temperature soldering 260oC/10seconds at terminals Pb free product are available 99% Sn above can meet RoHS environment substance directive request Case TO220AC Molded plastic Epoxy UL 94V-0 rate flame retardant Lead Lead solderable per MIL-STD-202, Method 208 guranteed Polarity As Marked Mounting Position Any Weight 2.24gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% PARAMETER Maximum Repetitive Peak Reverse Voltage SF1001 SF1002 SF1003 SF1004 SF1005 SF1006 SF1007 UNITS 50 100 150 200 300 400 600 Volts Volts Maximum RMS Voltage 35 70 105 140 210 320 420 Maximum DC Blocking Voltage 50 100 150 200 300 400 600 Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length at TC=1000C 10 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 150 Maximum Instandeous Forward Voltage at 10A 0.95 0 Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1000C Amps 1.3 1.7 Volts 10 500 Maximum Reverse Recovery Time (Note 1) 35 Typical Junction Capacitance (Note 2) -55 to +150 NOTES 1. Reverse Recovery Time test condition IF=0.5A , IR=1.0A , IRR=0.25A 2. Measured at 1.0MHz and applied reverse Voltage of 4.0V D.C 1 A 50 50 Operating and Storage Temperature Range TJ,TSTG www.paceleader.com.tw Volts Amps nS pF 0 C SF1001 thru SF1007 SUPERFAST RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES SF1001 THRU SF1007 www.paceleader.com.tw 2