180o Hybrid Junction, 2 - 200 MHz Features HH-106/107 V3 FP-2 (HH-106) • 0° - 180° Hybrid with Symmetrical Time Delay Between Ports • Available in Flatpack and Connectorized Packages • MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase differential and for Quadrature combining or performing summation/differential combining. C-8-107 (HH-107) Pin Configuration (HH-106) Pin No. Function Pin No. Function 1 A 5 B 2 GND 6 GND 3 GND 7 GND 4 C 8 D Functional Diagram 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 180o Hybrid Junction, 2 - 200 MHz HH-106/107 V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 2 - 200 MHz dB — — 1.0 Isolation A-B 2 - 200 MHz 5 - 50 MHz 2 - 200 MHz 5 - 50 MHz dB dB dB dB 25 30 30 35 — — — — C-D Amplitude Balance — 2 - 200 MHz dB — — 0.3 VSWR — 2 - 200 MHz 5 - 50 MHz Ratio Ratio — — — — 1.5:1 1.3:1 Phase Balance — 2 - 200 MHz ° — — 3 Impedance — 2 - 200 MHz Ohms — 50 — Input Power — 2 - 200 MHz Watts — — 1 1. All specifications apply with 50 ohm source and load impedance. Typical Performance Curves Ordering Information Part Number Package HH-106 PIN FP-2 HH-107 BNC C-8-107 HH-107 SMA C-8-107 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.