New Product MUR140 & MUR160 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency DO-204AC (DO-15) • High forward surge capability • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 400 V, 600 V IFSM 35 A trr 50 ns VF 1.05 V TJ max. 175 °C MECHANICAL DATA Case: DO-204AC (DO-15) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL MUR140 MUR160 UNIT Maximum repetitive peak reverse voltage VRRM 400 600 V Working peak reverse voltage VRWM 400 600 V Maximum DC blocking voltage VDC 400 600 V Maximum average forward rectified current at TA = 120 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 35 A TJ, TSTG - 65 to + 175 °C °C Operating junction and storage temperature range Document Number: 88684 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product MUR140 & MUR160 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) IF = 1.0 A Maximum instantaneous reverse current at rated DC blocking voltage (1) SYMBOL MUR140 MUR160 UNIT TJ = 25 °C TJ = 150 °C VF 1.25 1.05 V TJ = 25 °C TJ = 150 °C IR 5.0 150 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM trr 75 ns Maximum forward recovery time IF = 1.0 A, dI/dt = 100 A/µs, recovery to 1.0 V tfr 50 ns Note: (1) Pulse test: 300 µs pulse width, duty cycle ≤ 2 % THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance junction to ambient (1) MUR140 RθJA MUR160 50 UNIT °C/W Note: (1) Lead length = 3/8" on P.C. Board with 1.5" x 1.5" copper surface ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MUR160-E3/54 0.41 54 4000 13" diameter paper tape and reel MUR160-E3/73 0.41 73 2000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 3.0 L = 3/8" 2.0 P.C.B. with 1.5 x 1.5" Copper Pads 1.0 40 30 20 10 0 0 25 0 50 75 100 125 150 175 1 10 100 Ambient Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88684 Revision: 20-Aug-07 New Product MUR140 & MUR160 Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 175 °C 10 TJ = 150 °C 1 0.1 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 0.1 1.8 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Leakage Current (µA) 1000 TJ = 175 °C 100 TJ = 150 °C 10 1 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88684 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1