LED LED LAMP HD PR Green Yellow-green Yellow-green (HL) Yellow Sunset orange Red Red ● (555 nm) 30 GL3EG8 GL3EG41 130 GL3KG44 60 GL3EG44 ● GL3KG43 ● ● ● ● ● 8 130 GL3HY44 100 GL3HS44 100 GL3HD44 110 GL3PR44 12 20 GL3EG43 38 GL3HY43 25 GL3HS43 25 GL3HD43 25 GL3PR43 3 GL3KG62 22 GL3EG62 65 GL3HY62 40 GL3HS62 40 GL3HD62 50 GL3KG63 6 18 GL3HY63 16 GL3HS63 15 GL3HD63 17 GL3PR63 LT3E31W*2 18 LT3H31W*2 15 LT3E65W*2 25 LT3H65W*2 25 LT3S65W*2 25 LT3D65W*2 25 LT3P65W*2 3 100 GL4HY8 110 GL4HS8 80 GL4HD8 110 GL4PR8 15 20 GL5HD4 25 GL5PR4 3 150 GL5HY8 120 GL5HS8 80 GL5HD8 80 GL5PR8 15 GL5KG41 70 GL5EG41 160 GL5HY41 100 GL5HS41 100 GL5HD41 150 GL5PR41 15 GL5KG44 70 GL5EG44 160 GL5HY44 100 GL5HS44 100 GL5HD44 100 GL5PR44 15 GL5EG40 GL5KG43 120 GL5EG43 GL6EG11T*3 120 ● GL5EG47 15 ● GL6EG26T*3 140 ● Rectangle 1.8 × 3.9 ● GL8KG42 1.9 × 3.9 ● 2.0 × 3.2 ● GL5HY40 250 GL5HS40 200 GL5HD40 250 GL5PR40 600 GL5HY43 250 GL5HS43 250 GL5HD43 300 GL5HS47 6 GL5HD60 8 GL5HD47 8 GL2HD6 12 GL2PR6 15 GL2HY6 12 GL8EG2 30 GL8HD2 30 GL8EG4 50 GL8HD4 40 5 GL8HY42 6 GL8HD42 5 GL8EG5 28 GL8HY5 25 GL8HD5 22 GL8KG25 9 GL8EG25 12 GL8HY25 12 GL8HS25 10 GL8HD25 GL8KG29 5 GL8EG29 12 GL8HY29 10 GL8HS29 7 GL8EG23 6 GL8HY23 8 4 GL8EG21 8 GL8HY21 8 4 GL8EG26 8 GL8HY26 8 3.5 GL8EG22 6 GL8HY22 5 ● GL8KG21 ● GL8KG26 Square 5.0 × 5.0 ● GL8KG22 Triangle GL5HD261B0SB 80 GL5PR261B0SB 15 GL2EG6 1.5 GL8EG42 2.0 × 4.5 ● 2.0 × 5.0 300 GL5FG43 23 2.5 × 5.0 ● 2.0 × 3.2 ● 250 GL5EG60 ● 2.0 × 3.1 1.5 GL5EG4 ● Arch 2 60 GL5EG8 ● ø2 15 LT3P31W*2 GL5KG8 GL5EG261B0SB 150 ● Convex LT3D31W*2 30 GL4EG8 ● ø5 (Inverted cone) Long: 5.8 Oval Short: 4.6 GL3EG63 GL4KG8 ● ø5 (695 nm) 40 GL3PR8 ● ● (635 nm) Isosceles ● triangle *1 PR series (Red): I F = 5 mA (GL8PR25, GL8PR29: IF = 10 mA) *2 Taped model *3 With tie-bar HL: High-luminosity 35 LED Cylinder ● (610 nm) 60 GL3HD8 ● 60 (585 nm) 55 GL3HS8 ● ø4 (565 nm) GL3HY8 ● ø3 (565 nm) GL3KG8 Luminous intensity (mcd) TYP. HS Luminous intensity (mcd) TYP. HY Luminous intensity (mcd) TYP. FG Luminous intensity (mcd) TYP. EG Luminous intensity (mcd) TYP. KG Luminous intensity (mcd) TYP. Resin type Luminous intensity (mcd) TYP. Radiation shape (mm) (I F = 20 mA*1, Ta = 25°C) Colored diffusion Colored transparency Colorless transparency Milky diffusion Appearance ■ LED LAMPS 1.5 GL8PR42 0.7 12 GL8PR25 1.5 GL8HD23 6 8 GL8PR29 3 GL8PR21 0.7 GL8HS21 8 GL8HD21 GL8HD26 8 GL8PR26 0.7 GL8HS22 5 GL8HD22 8 GL8PR22 1.2 GL8PR28 0.9 Taped model is also available. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 97 LED LED LAMP Cylinder GL3PR8 series GL3PR44 series GL3HY43 series GL3KG62 series LT3E31W series GL3PR63 series LT3E65W series GL4PR8 series GL5PR4 series GL5HS8 series GL5KG41 series GL5PR44 series GL5EG40 series GL5HY43 series GL5EG60 series GL6EG11T GL5HD47 series Oval Convex GL6EG26T Arch GL2HY6 GL8EG2 series GL8HD4 series GL8HS21 series GL8HY26 series Rectangle GL8KG42 series GL8KG25 series Square GL8HD22 series 98 GL8HY29 series GL8HD23 series Triangle GL8PR28 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED DICHROMATIC LED LAMP Yellow- + Red green Yellow- + Red green Yellow- + Yellow green Yellow + Red GL5EJJ502C0X* 2 110/170 ● ø5 GL5EP5 GL5CU44 100/240 GL6CU7 120/250 ● 1.9 × 3.9 2.0 × 5.0 5.0 × 5.0 ● ● ❇ CU series: Common anode pin connection *1 P (Red) and H (yellow): I F = 10 mA GL5EJJ502C0X GL8HP5 series GL5ED5 series 10/6.5 8/3 GL9EH2 7/4 *2 Taped model GL5ED44 series GL9ED2 series 6/2 GL5HP5 15/9 GL8HP5 GL9HP2 3/1.5 1/0.8 HL: High-luminosity GL5ED60 series GL9ED4 LED GL6CU7 20/15 40/25 80/50 11/8 GL8ED5 GL9ED2 GL9ED4 ● GL3ED8 GL3ED8 40/9 GL5ED5 GL5ED44 GL5ED60 Luminous intensity (mcd) TYP. H P Luminous intensity (mcd) TYP. ● ● Rectangle E H Luminous intensity (mcd) TYP. Yellow- + Red green (HL) E D Luminous intensity (mcd) TYP. Yellow- + Orange green (HL) (I F = 20 mA*1, Ta = 25°C) E P ● ø3 Cylinder C U Luminous intensity (mcd) TYP. Radiation shape (mm) ❇ E JJ Colored diffusion Colored transparency Colorless transparency Milky diffusion Appearance Resin type (The values in luminous intensity are radiation color order) Luminous intensity (mcd) TYP. ■ DICHROMATIC LED LAMPS Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 99 LED HIGH-LUMINOSITY CHIP LED ✩New product ★Under development ■ HIGH-LUMINOSITY (AlGaInP) CHIP LEDs (Taped models only) Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type ZG Green ZE JE Luminous Yellow-green Luminous intensity intensity (mcd) (mcd) TYP. TYP. 1.6 × 0.8 (T: 0.35) ● GM1JE35200AE*1 1.6 × 0.8 (T: 0.55) ● GM1JE55200AE*1 ● 1.6 × 0.8 (T: 0.8) 6.1 LT1ZE67A 6.0 × 5.0 (T: 2.5) 6.0 × 5.0 (T: 2.3) (board insertion type) 1.6 × 1.15 (T: 0.8) (Side emitting) 2.7 × 1.3 (T: 1.2) (Side emitting) *1 *2 *3 *4 100 Luminous intensity (mcd) TYP. Sunset orange Luminous intensity (mcd) TYP. Orange Luminous intensity (mcd) TYP. 19 GM1JJ35200AE*1 19 GM1JV35200AE*1 18.8 GM1JS35200AE*1 13 GM1JV55200AE*1 16.8 GM1JS55200AE*1 20.9 GM1JJ55200AE*1 LT1ZV67A 78.7 LT1ZS67A 123.2 LT1ZJ67A 25.4 GM1ZV80300AE 75 GM1ZS80300AE 75 ● LT1JV67A*1 16.5 LT1JS67A*1 14.1 LT1ZV40A 92.7 LT1ZS40A 144.1 LT1ZG40A 6.2 LT1ZE40A ZJ JJ YJ 13 28.2 ● GM1ZV40300AE GM1ZJ80300AE LT1ZJ40A ZR JR Red GM1JR35200AE*1 Luminous intensity (mcd) TYP. 13 19 123.3 75 127.8 11 ● GM5JV95200AE 80 ● GM5ZV01200A*3 500 ● GM5YV01210A*4 1 300 GM5YS01210A*4 1 700 GM5YJ01210A*4 1 500 ● GM5ZV03200Z*3 500 GM5ZS03200Z*3 700 GM5ZJ03200Z*3 500 GM5ZR03200Z*3 400 ● GM4JV81200AE*2 GM4JS81200AE*2 GM4JJ81200AE*2 40 GM4JR81200AE*2 45 35 12 GM1JJ40300AE 9.5 LT1ZS95A 290 LT1ZJ95A 200 GM5JS95200AE 90 GM5JJ95200AE 70 GM5ZS01200A*3 700 GM5ZJ01200A*3 500 40 ● GM1ZR40300AE 78.7 170 LT1ZE95A GM1JS40300AE LT1ZR40A LT1ZV95A 15 60 55 GM1JV40300AE LT1ZG95A GM1ZJ40300AE GM1ZR80300AE 73.9 GM1ZS40300AE ● 78 LT1ZR67A 60 ● 3.2 × 2.8 (T: 1.9) Amber ZS JS YS ● ● 2.0 × 1.25 (T: 0.8) LT1ZG67A ZV JV YV (I F = 20 mA, Ta = 25°C) GM5ZR95200AE 100 GM5ZR01200A*3 400 ★ GM4JR81250AE*2 ● LT1JV45A*1 20 LT1JS45A*1 24 LT1JJ45A*1 55 30 (45) 16 LT1JS67A, LT1JV67A, GM1JV55200AE series, GM1JV35200AE series, GM1JV40300AE series, LT1JV45A series: I F = 5 mA GM4JV81200AE series: IF = 10 mA GM5ZR01200A series, GM5ZR03200Z series: I F = 60 mA GM5YV01210A series: IF = 90 mA Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED HIGH-LUMINOSITY CHIP LED ✩New product ★Under development ■ HIGH-LUMINOSITY (InGaN) CHIP LEDs (Taped models only) 1.6 × 0.8 (T: 0.35) 1.6 × 0.8 (T: 0.55) 3.2 × 2.8 (T: 1.9) 6.0 × 5.0 (T: 2.5) 6.0 × 5.0 (T: 2.3) board insertion type 1.6 × 1.15 × 0.8 (Side emitting) 2.7 × 1.3 × 1.2 (Side emitting) Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type (I F = 10 mA, Ta = 25°C) BC GC Blue Green Luminous intensity (mcd) TYP. ● ● GM1GC35200AC 54 23 GM1GC55200AC 47 73 GM5GC95200AC*2 311 120 ★ GM5GC95250AC*2 500 200 GM5GC01200AC*3 520 300 ★ GM5GC01250AC*3 1 200 GM5GC03200Z* 3 520 50 ★ GM4GC81250AC 170 12 GM4GC13300AC 46 ★ GM1BC35370AC*1 23 ● ★ GM1BC55270AC*1 ● GM5BC95200AC*2 ● ★ GM5BC95250AC*2 ● ★ GM5BC95270AC*2 370 ● GM5BC01200AC*3 ● ★ GM5BC01250AC*3 ● ★ GM5BC01270AC*3 550 ● GM5BC03200Z* 3 200 ● ✩ GM5BC03210Z* 3 300 ● ★ GM4BC81250AC GM4BC13300AC ● Luminous intensity (mcd) TYP. LED *1 GM1BC35370AC, GM1BC55270AC: IF = 5 mA *2 GM5BC95200AC series, GM5BC95250AC series: I F = 20 mA *3 GM5BC01200AC series, GM5BC01250AC series, GM5BC03200Z series: I F = 50 mA Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 101 LED CHIP LED ■ CHIP LEDs (Taped models only) Yellow Luminous intensity (mcd) TYP. Luminous intensity (mcd) TYP. Yellow-green GM1EG35200A 19 GM1EG55200A LT1E97A LT1E67A LT1F67A LT1F67AF LT1E40A GM5EG95200A GM4EG81200A LT1E45A 19 23 GM1HY55200A LT1H97A 11.5 9.8 23 LT1H67A 8.3 19 18.1 20 29 LT1H40A 10.8 ● 1.6 × 0.8 (T: 0.8) 2.0 × 1.25 (T: 0.8) 3.2 × 2.8 (T: 1.9) 1.6 × 1.15 × 0.8 (Side emitting) 2.7 × 1.3 × 1.2 (Side emitting) ● LT1K67A 3.8 ● LT1K40A 5 ● ● ● ● ● ● ● S HS Sunset orange GM1HS55200A LT1S97A LT1S67A LT1S40A ● U UR D HD Luminous intensity (mcd) TYP. Milky diffusion Colorless transparency Colored transparency Colored diffusion Resin type 11.4 8.2 6.9 9.4 Red GM1HD55200A LT1D97A LT1D67A LT1D40A GM5HD95200A 12.5 11 8.8 11.9 13.8 Red (HL) GM1UR55200A LT1U97A LT1U67A LT1U40A GM5UR95200A P 29.7 35.3 29.7 35.6 80 Red LT1P97A LT1P67A LT1P40A *1 P (Red) series: IF = 5 mA LT1D97A series LT1E45A series LT1JV45A series GM4BC13300AC series GM5ZR01200A series, GM5BC01200AC series GM5BC01250AC series, GM5YV01210A series 102 1.6 1.3 1.3 HL: High-luminosity LT1D67A series LT1ZR67A series LT1JS67A series GM1ZV80300AE series GM1JV35200AE series GM1EG35200A GM1BC35200AC series GM1BC35310AC Luminous intensity (mcd) TYP. ● Luminous intensity (mcd) TYP. ● Luminous intensity (mcd) TYP. 1.6 × 0.8 (T: 0.55) 1.6 × 0.8 (T: 0.6) 1.6 × 0.8 (T: 0.55) 1.6 × 0.8 (T: 0.6) 1.6 × 0.8 (T: 0.8) 2.0 × 1.25 (T: 0.8) 3.2 × 2.8 (T: 1.9) Luminous intensity (mcd) TYP. Green H HY E FEG ● 1.6 × 0.8 (T: 0.35) Outline dimensions (mm) (IF = 20 mA*1, Ta = 25°C) K Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type GM1EG55200A series GM1JV55200AE series GM1BC55250AC series GM4JV81200AE series GM4EG81200A GM4BC81250AC series GM5ZV03200Z series GM5BC03200Z series LT1E40A series LT1ZE40A series GM1JV40300AE series GM1ZV40300AE series LT1ZR95A series GM5JV95200AE series, GM5EG95200A series GM5BC95200AC series, GM5BC95250AC series Taped model Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED CHIP LED ★Under development ■ HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (Taped models only) (I F = 20 mA, [Blue, Green: I F = 10 mA], Ta = 25°C) 1.6 × 1.6 (T: 0.8) Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type ● ZV BC ZS GC Amber + Blue Sunset orange + Green Luminous intensity (mcd) TYP. GM1ZSG80300A 66/46.1 GM1ZVB80300A Luminous intensity (mcd) TYP. 43.8/14.4 (I F = 40 mA, Ta = 25°C) 6.0 × 5.0 (T: 2.5) Milky diffusion Colorless transparency Colored transparency ● BC GC BC ZR GC ZR Blue + Green Blue + Red Green + Red GM5BG01210A Luminous intensity (mcd) TYP. 300/860 ■ DICHROMATIC TYPE CHIP LEDs (Taped models only) 1.6 × 1.6 (T: 0.8) Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type ● GM5BG01210A series GM5ZRB01210A Luminous intensity (mcd) TYP. 300/580 GM5ZRG01210A Luminous intensity (mcd) TYP. 860/580 (I F = 20 mA, Ta = 25°C) E H E D Yellow-green + Yellow Luminous intensity (mcd) TYP. LT1EH67A 19/8.3 Yellow-green + Red Luminous intensity (mcd) TYP. LT1ED67A 19/8.3 LT1ED67A series GM1ZVB80300A series LED Outline dimensions (mm) Colored diffusion Resin type ■ HIGH-LUMINOSITY WHITE TYPE CHIP LEDs (with blue chip) (Taped models only) (Ta = 25°C) BW Outline dimensions (mm) Color coordinates (x, y) Radiation color 3.2 × 2.8 (T: 1.9) 6.0 × 5.0 (T: 1.5) 6-terminal leadless 6.0 × 5.0 (T: 2.5) 4-terminal leadless (0.31, 0.3) White ★ GM5BW95300A* 1 Luminous intensity (mcd) TYP. 1 100 (0.31, 0.31) White ★ GM5BW01300A* 3 4 200 (0.31, 0.31) White ★ GM5BW01301A* 2 1 800 *1 GM5BW95300A: IF = 20 mA GM5BW95300A *2 GM5BW01301A: I F = 40 mA GM5BW01300A White *3 GM5BW01300A: I F = 35 mA/chip GM5BW01301A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 103 LED CHIP LED ✩New product ★Under development ■ WHITE TYPE CHIP LEDs (with blue-violet chip) (Taped models only) Outline dimensions (mm) Color coordinates (x, y) 6.0 × 5.0 (T: 2.5) 4-terminal leadless (I F = 40 mA, Ta = 25°C) VA Radiation color GM5VA33331AC Luminous intensity (mcd) TYP. 450 (0.33, 0.33) White (0.34, 0.40) Yellowish white ★ GM5VA34400AC (700) (0.29, 0.27) Purplish white ★ GM5VA29270AC (350) (0.30, 0.50) Greenish white ★ GM5VA30500AC (900) ( ) indicates reference value. GM5VA33331AC ■ HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (RGB 3-color) (Taped models only) (Ta = 25°C) 1.6 × 1.6 (T: 0.55) 1.6 × 1.6 (T: 0.8) 6.0 × 5.0 (T: 2.5) 4-terminal leadless 6.0 × 5.0 (T: 2.5)*7 6-terminal leadless WA ★ GM1WA55360A*1 ● GM1WA80350A*2 125/150/55 80/92/30 ● GM5WA02200A*3 850 [Mixed color] ● GM5WA06203A*3 GM5WA06210A*4 GM5WA06250A*5 GM5WA06260A*3 GM5WA06270A*6 GM5WA06200Z*3 GM5WA06203Z*3 GM5WA06250Z*4 850 [Mixed color] 250/400/350 1 400 [Mixed color] 1 725 [Mixed color] 3 000 [Mixed color] 850 [Mixed color] 850 [Mixed color] 1 400 [Mixed color] ✩ GM5WA05360A*6 2 200 [Mixed color] ● ● ● ● ● ● 6.0 × 5.0 (T: 1.5) 6-terminal leadless *1 *2 *3 *4 *5 *6 *7 ● GM1WA55360A: IF = 10 mA (Red, Green, Blue) GM1WA80350A: IF = 20 mA (Red), IF = 10 mA (Green, Blue) GM5WA02200A, GM5WA06203A, GM5WA06260A, GM5WA06200Z, GM5WA06203Z: I F = 40 mA (Red, Green), IF = 20 mA (Blue) GM5WA06210A: IF = 40 mA (Red, Green, Blue) GM5WA06250A, GM5WA06250Z: IF = 35 mA (Red, Green), IF = 20 mA (Blue) GM5WA06270A, GM5WA05360A: IF = 35 mA (Red, Green, Blue) GM5WA06270A: T: 2.4 mm GM1WA55360A 104 Luminous intensity (mcd) TYP. ● ● 6.0 × 5.0 (T: 2.3 [resin part]) 6-terminal Red + Green + Blue Milky diffusion Colorless transparency Colored transparency Outline dimensions (mm) Colored diffusion Resin type GM1WA80350A GM5WA02200A GM5WA06203A GM5WA06210A GM5WA06250A GM5WA06260A GM5WA06200Z GM5WA06203Z GM5WA06250Z GM5WA06270A GM5WA05360A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. LED LEDs FOR CAMERA DATA BACK / LED DRIVERS ★Under development ■ LEDs FOR CAMERA DATA BACK Model No. GW01M59001PE (I F = 1 mA, Ta = 25°C) No. of dots Outline dimensions (mm) Radiation color 7 2.6 × 2.9 (T: 0.9) Surface-mount type Amber Luminous intensity (mcd) (MIN. 0.4 TYP. 0.8) ( ) indicates reference value. GW01M59001PE ■ LED DRIVERS Description Function Supply voltage (V) Package 4.5 to 5.5 P-SSOP056-0600/ P-HQFN052-0707 3.0 to 5.5 P-SSOP040-0300 2.7 to 4.5 P-VQFN032-0505/ WL-CSP*1 ★IR2D20N/U 24-dot LED panel driver with constant-current sink outputs • Output current (constant-current sink outputs) : 30 mA (MAX.) (setup by external resistor) • Graduation function (clock cycle setting or external synchronization) • Independent current control for three systems (for RGB LED) • LED drive voltage : 15 V • Rated output voltage : 20 V (MAX.) • fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) ★IR2D07N1 16-dot LED panel driver with constant-current sink outputs • Output current (constant-current sink outputs) : 60 mA (MAX.) (setup by external resistor) • Rated output voltage : 7 V (MAX.) • fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) ★IR2E46U6/Y6 RGB LED driver for flash lights and illuminations ★IR2E47U6 White LED driver for back light ★IR2E48U6 • Output current : 155 mA/ch (MAX.) (3ch) (in flash mode) • Control by I2C bus • Illumination mode (64 levels/ch) • Flash mode (32 levels/ch) • Brightness adjustment • Output current : 20 mA (MAX.) (setup by external resistor) • Independent current control for two systems (4 outputs and 2 outputs) • LED non-connected judging function • Brightness adjustment • Output current : 20 mA (MAX.) • LED non-connected judging function • Brightness adjustment P-VQFN024-0404 (*2) 2.7 to 5.5 LED Model No. P-VQFN024-0404 *1 WL-CSP : Waferr-level CSP *2 Contact a SHARP sales office regarding a wafer-level CSP. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 105