XT23 Vishay Dale Quartz Crystals FEATURES • Ultra-miniature size: 3.2 x 2.5 x 0.8 (mm) • Wide frequency range • Seam sealing • Emboss taping • Compliant to RoHS Directive 2002/95/EC The XT23 is a miniature SMD crystal with 3.2 x 2.5 (mm) ceramic package and a height of 0.8 mm. 12 MHz to 25 MHz frequncy makes it widely applied in PDA, GPS, MP3, PCMCIA, bluetooth, and portable instruments. STANDARD ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Frequency range CONDITION Temperature stability MIN. TYP. MAX. MHz 12.000 - 25.000 F/FO at 25 °C ppm - ± 30 - TC ref. to 25 °C ppm - ± 50 - °C 0 - + 70 FO Frequency tolerance UNIT Operating temperature range TOPR Storage temperature range TSTG °C - 55 - + 125 Shunt capacitance C0 pF - - 3 Load capacitance CL customer specified pF 10 - series Insulation resistance IR 100 VDC M 500 - - Drive level DL μW 10 100 300 Aging Fa at 25 °C, per year ppm -5 - +5 EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE) FREQUENCY RANGE (MHz) MAX. ESR () MODE 12.000 to 12.999 100 fundamental 13.000 to 19.999 80 fundamental 20.000 to 25.000 70 fundamental DIMENSIONS in inches [millimeters] 0.126 ± 0.008 [3.20 ± 0.20] 0.035 [0.90] typ. Recommended Solder Pattern MARKING AREA 0.098 ± 0.008 [2.50 ± 0.20] 0.031 [0.80] typ. 1 2 4 3 0.027 [0.70] typ. 0.051 0.043 0.051 [1.30] [1.09] [1.30] 0.047 [1.20] 0.047 [1.20] typ. 0.024 [0.61] 0.047 [1.20] 0.0315 [0.80 max.] Document Number: 35063 Revision: 09-May-11 Note Pin #2 and pin #4 are connected through cover, in case connected to GND. Frequency might be drifted. For technical questions, contact: [email protected] www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XT23 Quartz Crystals Vishay Dale ORDERING INFORMATION XT23 -20 25M e4 MODEL LOAD blank = series -20 = 20 pF -32 = 32 pF -16 = 16 pF FREQUENCY/MHz JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER X T 2 3 2 MODEL 0 A LOAD 2 PACKAGE CODE 5 M FREQUENCY GLOBAL PART NUMBERING X T 9 S MODEL NUMBER XT9S = XT49S XT9M = XT49M XTU1 = XTUM1 2 0 A LOAD CAPACITANCE PACKAGE CODE 18 = 18 pF 20 = 20 pF NL = series to be specified by customer Tape and reel G = RF5 (XT9S) H = RF7 (XT9M) Bulk A = B04 (all models) N A 4 0 M OPTIONS FREQUENCY NA = no additional options RR = extended temperature of - 40 °C to + 85 °C Contact factory for all other options 4M = 4 MHz 40M = 40 MHz 100M = 100 MHz 12M288 = 12.288 MHz M is used as decimal place holder in frequency Example: XT49S-20 40M X T 3 6 2 0 MODEL NUMBER LOAD CAPACITANCE XT46 = XT46C XT36 = XT36C XT35 = XT35 XT23 = XT23 18 = 18 pF 20 = 20 pF NL = series to be specified by customer A PACKAGE CODE Tape and reel H = RF7 Bulk A = B04 (all models) 1 2 M FREQUENCY 4M = 4 MHz 40M = 40 MHz 100M = 100 MHz 12M288 = 12.288 MHz M is used as decimal place holder in frequency Example: XT36C-20 12M www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 35063 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1