MMBZ4617-V to MMBZ4627-V www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar low noise Zener diodes 3 • 350 mW high quality voltage regulator designed for low leakage, low current and low noise applications • 5 % tolerance on VZ 1 2 • High temperature soldering 260 °C/4 x 10 s at terminals guaranteed: • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 6.2 V Test current IZT 0.25 mA VZ specification Pulse current Int. construction Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY MMBZ4617-V to MMBZ4627-V MMBZ4617-V to MMBZ4627-V-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box MMBZ4617-V to MMBZ4627-V MMBZ4617-V to MMBZ4627-V-series-GS08 3000 (8 mm tape on 7" reel) 15 000/box PACKAGE PACKAGE NAME SOT-23 WEIGHT 8.8 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT On FR - 5 board using recommended solder pad layout Ptot 350 mW Forward voltage, maximum IF = 200 mA VF 1.1 V Forward voltage, typical IF = 200 mA VF 0.97 V Junction to ambient air On FR - 5 board using recommended solder pad layout RthJA 420 °C/W Tj 150 °C Tstg - 55 to + 150 °C Power dissipation Junction temperature, maximum Storage temperature range Rev. 1.5, 05-Oct-11 Document Number: 85770 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ4617-V to MMBZ4627-V www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE (1) TEST CURRENT REVERSE LEAKAGE CURRENT VZ at IZT1 IZT1 IR at VR MARKING CODE V mA MIN. NOM. MAX. μA DYNAMIC ZENER RESISTANCE CURRENT ZZT at IZT1 V MAX. NOISE DENSITY IZM ND at IZT1 mA μV/Hz MAX. MAX. MAX. MMBZ4617-V G17 2.280 2.4 2.520 0.25 2 1 1400 95 1 MMBZ4618-V G18 2.565 2.7 2.835 0.25 1 1 1500 90 1 MMBZ4619-V G19 2.850 3 3.150 0.25 0.8 1 1600 85 1 MMBZ4620-V G20 3.135 3.3 3.465 0.25 7.5 1.5 1650 80 1 MMBZ4621-V G21 3.420 3.6 3.780 0.25 7.5 2 1700 75 1 MMBZ4622-V G22 3.705 3.9 4.095 0.25 5 2 1650 70 1 MMBZ4623-V G23 4.085 4.3 4.515 0.25 4 2 1600 65 1 MMBZ4624-V G24 4.465 4.7 4.935 0.25 10 3 1550 60 1 MMBZ4625-V G25 4.845 5.1 5.355 0.25 10 3 1500 55 2 MMBZ4626-V G26 5.320 5.6 5.880 0.25 10 4 1400 50 4 MMBZ4627-V G27 5.890 6.2 6.510 0.25 10 5 1200 45 5 Note (1) V tested with 5 ms pulse Z PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.5, 05-Oct-11 Document Number: 85770 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000