FEATURES / BENEFITS 586 Series Single Chip BASED LED T1 3/4 BI-PIN RoHS compliant High brightness with low current draw - uses up to 90% less energy than incandescent Long life - up to 100K hours No heat generated Mounts directly into industry-standard socket Resistant to shock and vibration AlInGaP and InGaN technology Super bright single chip design Colors include red, green, yellow, blue and white Dialight's line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. SPECIFICATIONS Operating Voltages: 6, 14, and 28 VDC Operating temperature: -30oC to +80oC Storage temperature: -40oC to +85oC Replaces incandescent lamp numbers*: 2314, 2323, 2324, 2325, 2335, 2337, 2342, 7327, 7328, 7330, 7349, 7377, 7380, 7381, 7382, 7387, 7876, and 7945 Polarity Indicators Measurements are typical Dimensions are inches [mm] *See Dialight’s Incandescent lamp/based LED cross reference for a complete listing CONSIDERATIONS Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will optimize the light output. Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced. Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage. Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586R001_C 586 Series Single Chip BASED LED T1 3/4 BI-PIN T1 3/4 BI-PIN 586-1301-101F Red PEAK WAVELENGTH (nm) 626 6 10 90 586-1302-101F Green 525 6 10 1700 586-1303-101F Yellow 590 6 10 110 586-1305-101F Blue 470 6 10 500 586-1306-101F White * 6 10 635 586-1301-103F Red 626 14 10 90 586-1302-103F Green 525 14 10 1700 586-1303-103F Yellow 590 14 10 110 586-1305-103F Blue 470 14 10 500 586-1306-103F White * 14 10 635 586-1301-105F Red 626 28 10 90 586-1302-105F Green 525 28 10 1700 586-1303-105F Yellow 590 28 10 110 586-1305-105F Blue 470 28 10 500 586-1306-105F White * 28 10 635 PART NUMBER COLOR VOLTAGE (VDC) CURRENT TYP.-(mA) INTENSITY TYP.-(mcd) RoHS COMPLIANT * Color coordinates: x = .320, y = .320 Based LE Ds SELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: T1 3/4 Midget Flange T1 3/4 Bi-Pin T1 3/4 Wedge (T5) T2 Telephone Slide T3 1/4 Miniature Bayonet (BA9s) T3 1/4 Miniature Screw (E10) T3 1/4 Wedge (T10) 15mm SC Bayonet (BA15s) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586R001_C