V338ME01-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Modems • Mobile Radios • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 338 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -110 Harmonic Suppression (2nd) -13 Tuning Voltage 0 Max Units 338 MHz dBc/Hz -12 dBc 2 Vdc MHz/V 11 Tuning Sensitivity (avg.) 6 dBm 250 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output 0 Load Impedance 3 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-16M Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 17 Vdc 21 mA Additional Notes Pin 4 is no connect or ground. LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V338ME01-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 350 348 346 344 342 340 338 336 334 332 330 328 326 324 322 320 85 °C 25 °C -40 °C 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 6 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 327 329 332 334 336 339 341 344 346 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 P4 REST Vt RF OUT Vcc MOD GROUND PACKAGE H MINI-16M 0.220 MINI-16M-LOW 0.160 MINI-16M-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B