SMV5068A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • Satellite Communications • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 4780 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -82 Harmonic Suppression (2nd) -20 Tuning Voltage 0.5 Max Units 5356 MHz dBc/Hz -18 dBc 4.5 Vdc MHz/V 162 Tuning Sensitivity (avg.) 1 dBm Input Capacitance 50 pF Pushing 8 MHz/V Pulling (20. dB Return Loss, Any Phase) 3 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -30 Package Style Power Supply Requirements -1 SUB-L Min Typ Supply Voltage (Vcc, nom.) 4.1 Supply Current (Icc) 20 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module SMV5068A-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 5450 5400 5350 5300 5250 5200 5150 5100 5050 5000 4950 4900 4850 4800 4750 4700 4650 4600 85 °C 25 °C -30 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 3 RECOMMENDED FOOTPRINT 2 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 1 0 -1 -2 0.030 MIN. CUTBACK FROM LIVE PADS -3 -4 -5 4650 4734 4812 4886 4958 5040 5125 5211 5301 5385 FREQUENCY (MHz) 85 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B