New Product UH6PD Vishay General Semiconductor High Current Density Surface Mount Ultrafast Rectifier FEATURES • Very low profile - typical height of 1.1 mm eSMP ® Series • Ideal for automated placement • Oxide planar chip junction K • Ultrafast recovery times for high frequency • Low forward voltage drop • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 1 2 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TO-277A (SMPC) K Anode 1 Cathode Anode 2 • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 6.0 A VRRM 200 V IFSM 90 A trr 25 ns VF at IF = 6.0 A 0.73 V TJ max. 175 °C Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer computer, automotive, and telecommunication applications. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code UH6PD UNIT H6D Maximum repetitive peak reverse voltage VRRM 200 V Maximum average forward rectified current (fig. 1) IF(AV) 6.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 90 A TJ, TSTG - 55 to + 175 °C Operating junction and storage temperature range Document Number: 89150 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PD Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 3.0 A TA = 25 °C IF = 6.0 A Instantaneous forward voltage VF (1) IF = 3.0 A TA = 25 °C VR = 200 V TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Reverse recovery time IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 0.1 IRM TYP. MAX. 0.80 - 0.87 1.05 0.65 - 0.73 0.90 - 10 16 200 19 25 29 40 UNIT V TA = 125 °C IF = 6.0 A Reverse current SYMBOL IR (2) µA ns trr IF = 6 A, dI/dt = 200 A/µs, VR = 200 V, Irr = 0.1 IRM, TA = 125 °C S 0.2 - IRM 5.5 - A Qrr 90 - nC Typical forward recovery time IF = 6 A, dI/dt = 48 A/µs, VF = 1.1 x VF max. tfr 140 - ns Typical junction capacitance 4.0 V, 1 MHz CJ 80 - pF Typical softness factor (tb/ta) Reverse recovery current Typical stored charge - Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RJA Typical thermal resistance UH6PD (1) UNIT 95 °C/W RJL (2) 5 Notes (1) Units mounted on recommended P.C.B. 1 oz. pad layout (2) Mounted on 25 mm x 25 mm x 2 copper pad areas FR4 PCB ORDERING INFORMATION (Example) PREFERRED P/N UH6PD-M3/86A UH6PD-M3/87A UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 86A 1500 7" diameter plastic tape and reel 0.10 87A 6500 13" diameter plastic tape and reel (1) 0.10 86A 1500 7" diameter plastic tape and reel UH6PDHM3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel UH6PDHM3/86A Note (1) Automotive grade www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89150 [email protected], [email protected], [email protected] Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PD Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 7 6 5 4 3 2 TL Measured at the Terminal of Cathode Side 1 TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.1 0.01 0 0 25 50 75 100 125 150 10 175 20 30 40 50 60 70 80 90 Lead Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 100 1000 6 D = 0.8 Junction Capacitance (pF) D = 0.5 D = 0.3 D = 0.2 5 Average Power Loss (W) TA = 175 °C 100 D = 0.1 4 D = 1.0 3 T 2 1 D = tp/T TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 tp 10 0 0 1 2 3 4 5 6 7 0.1 1 10 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 Instantaneous Forward Current (A) 100 TA = 175 °C 10 TA = 150 °C TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Document Number: 89150 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PD Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC TO-277A www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89150 [email protected], [email protected], [email protected] Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1