VISHAY UH1PB

New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
Surface Mount Ultrafast Rectifier
FEATURES
• Very low profile - typical height of 1.0 mm
eSMP ® Series
• Ideal for automated placement
• Oxide planar chip junction
• Ultrafast recovery times for high frequency
• Meets MSL level 1 per J-STD-020, LF maximum peak of
260 °C
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
DO-220AA (SMP)
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
100 V, 150 V, 200 V
IFSM
30 A
trr
25 ns
VF at IF = 1.0 A
0.75 V
TJ max.
175 °C
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for
ultrafast switching speeds of AC/AC and DC/DC converters
in high temperature conditions for both consumer and
automotive applications.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
UH1PB
UH1PC
UH1PD
HB
HC
HD
100
150
200
UNIT
Maximum repetitive peak reverse voltage
VRRM
Maximum average forward rectified current (fig. 1)
IF(AV)
1.0
A
Peak forward surge current 10 ms single
half sine-wave superimposed on rated load
IFSM
30
A
TJ, TSTG
- 55 to + 175
°C
Operating junction and storage temperature range
Document Number: 89173
Revision: 19-Apr-11
V
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 0.6 A
TA = 25 °C
Rated VR
TA = 125 °C
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
IF = 1.0 A, dI/dt = 50 A/μs,
VR = 30 V, Irr = 0.1 IRM
TA = 25 °C
Typical softness factor (tb/ta)
Maximum reverse recovery current
IF = 1.0 A, dI/dt = 200 A/μs,
VR = 200 V
TA = 125 °C
Typical stored charge
Typical junction capacitance
0.88
-
0.95
1.05
0.69
-
4.0 V, 1 MHz
UNIT
0.75
0.85
-
1.0
5.0
25
19
25
27
40
S
0.4
-
IRM
3.7
5.5
A
Qrr
48
-
nC
CJ
16
-
pF
V
TA = 125 °C
IF = 1.0 A
Maximum reverse recovery time
MAX.
VF (1)
IF = 0.6 A
Reverse current
TYP.
TA = 25 °C
IF = 1.0 A
Instantaneous forward voltage
SYMBOL
IR (2)
μA
ns
trr
-
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
UH1PB
UH1PC
RJA (1)
120
RJM (1)
20
UH1PD
UNIT
°C/W
Note
(1) Free air, mounted on recommended copper pad area. Thermal resistance R
JA - junction to ambient, RJM junction to mount at the terminal
cathode band
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
UH1PD-M3/84A
0.024
84A
3000
7" diameter plastic tape and reel
UH1PD-M3/85A
0.024
85A
10 000
13" diameter plastic tape and reel
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 89173
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
Instantaneous Reverse Current (μA)
Average Forward Rectified Current (A)
1.2
1.0
0.8
0.6
0.4
TM Measured
at the Cathode Band Terminal
0.2
95
105
115
125
TA = 125 °C
TA = 100 °C
1
0.1
TA = 25 °C
135
145
155
165
10
175
20
30
40
50
60
70
80
90
Mount Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
1.0
D = 0.2
0.7
D = 1.0
D = 0.1
0.6
0.5
0.4
T
0.3
0.2
0.1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.8
D = tp/T
Junction Capacitance (pF)
D = 0.5
D = 0.3
0.8
10
tp
1
0
0.4
0.2
0.6
0.8
1.0
0.1
1.2
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
10
1000
TA = 175 °C
TA = 150 °C
TA = 125 °C
TA = 100 °C
0.1
TA = 25 °C
0.01
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Transient Thermal Impedance (°C/W)
0
1
100
100
0.9
Average Power Loss (W)
TA = 150 °C
10
0.01
0
Instantaneous Forward Current (A)
TA = 175 °C
Junction to Ambient
100
10
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Document Number: 89173
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.158 (4.00)
0.146 (3.70)
0.036 (0.91)
0.024 (0.61)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.025 0.030
(0.635) (0.762)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30)
0.000 (0.00)
www.vishay.com
4
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.100
(2.54)
0.050
(1.27)
0.018 (0.45)
0.006 (0.15)
For technical questions within your region, please contact one of the following:
Document Number: 89173
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1