RoHS Compliant E-Series 2-Way 0° Power Divider 5 – 500 MHz Features • • • • • • MAPD-007249-ESML21 V1P SM-24 package Surface mount Wide frequency range 2-Way—0° Lead Free RoHS* Compliant and is 2600C reflow compatible. Available on Tape and Reel. Description M/A-COM’s MAPD-007249-ESML21 is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel. Pin Configuration Ordering Information Pin No. Function 1 Ground 2 Not Connected 3 Port 2 4 Port 1 5 Not Connected 6 Input Part Number Package MAPD-007249-ESML21 500 piece reel Note: Reference Application Note M513 for reel size information. Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Maximum Power Rating 1 Watt Internal Load Dissipation 0.125 Watt Pin Temperature (10 Sec) 250°C Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant E-Series 2-Way 0° Power Divider 5 – 500 MHz MAPD-007249-ESML21 V1P Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 5 - 500 MHz — — — Insertion Loss FL—fU 5 - 500 50 –250 250 - 500 dB dB dB — — — 0.25 0.3 0.5 0.5 0.5 1.0 Isolation FL—fU 5 - 500 50 –250 250 - 500 dB dB dB 25 24 23 50 33 30 — — — Amplitude Unbalance FL—fU 5 - 500 50 –250 250 - 500 dB dB dB — — — — — — 0.15 0.3 0.6 Phase Unbalance FL—fU 5 - 500 50 –250 250 - 500 Degrees Degrees Degrees — — — — — — 1 2 5 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.