SAW Components SAW band–stop filter DVB–H / DVB–T / ISDB–TB Series/type: Ordering code: B8766 B39901-B8766-P810 Date: Version: August 31, 2009 2.0 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Revision history: changes compared to previous iteration issue ISSUE ORIGINATOR DETAILED SPECIFICATION CHANGES DATE LU31A_v1.0 G. Kloska initial release Jan 26, 2009 B8766_v1.0 adaption of specification for maximum and G. Kloska minimum insertion attenuation and typical Aug 27, 2009 suppression levels based on statistical data B8766_v2.0 G. Kloska maximum rating for source power added Please read cautions and warnings and important notes at the end of this document. 2 August 31, 2009 Aug 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Application ■ Low-loss band–stop filter for ■ ■ ■ ■ ■ DVB-H, DVB-T and ISDB-TB GSM900 Tx suppression Low insertion attenuation Low amplitude ripple Impedance at input and output 50 Ω Unbalanced to unbalanced operation Package size 1.4 × 1.1 × 0.4 mm3 Maximum height of 0.45 mm Package code QCS5W RoHS compatible Approximate weight 0.003 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) 0.25 2 3 bottom view 1 0.325 5 4 0.5 0.5 0.4 ■ ■ ■ ■ ■ ■ ■ ■ 0.575 Features side view 1.1 1.4 top view Pin configuration ■ ■ ■ ■ ■ 1 2 3 4 5 Input Coupling pin Coupling pin Output Case ground Please read cautions and warnings and important notes at the end of this document. 5 3 2 3 1 4 August 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Characteristics T = +25 ˚C ± 2 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network Temperature range for specification: Terminating source impedance: Terminating load impedance: min. Nominal center frequency fN Minimum insertion attenuation αmin 470.00 ... 862.00 MHz ... ... ... ... 750.00 798.00 858.00 862.00 max. — MHz — 1.3 1.6 dB — — — — 1.8 1.7 3.4 4.1 2.0 2.0 3.8 5.0 dB dB dB dB αmax Maximum insertion attenuation 470.00 750.00 798.00 858.00 — typ. @ 25 ˚C 897.5 MHz MHz MHz MHz α Attenuation 174.00 880.00 1710.00 1920.00 ... 230.00 MHz ... 915.00 MHz ... 1785.00 MHz ... 1980.00 MHz 37.0 37.0 25.0 30.0 40.0 41.0 28.0 34.0 — — — — dB dB dB dB Matching network (element values depend on PCB layout) Ls1 1 4 5 5 2 3 Lp2 Lp3 Please read cautions and warnings and important notes at the end of this document. 4 Ls4 Ls1 Lp2 Lp3 Ls4 = 16 nH = 20 nH = 15 nH = 20 nH Q factor of inductors: 40 @ 770 MHz August 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network min. Nominal center frequency fN Minimum insertion attenuation αmin 470.00 ... 862.00 MHz ... ... ... ... 750.00 798.00 858.00 862.00 max. — MHz — 1.3 1.6 dB — — — — 1.8 1.7 3.4 4.1 2.0 2.0 5.0 7.0 dB dB dB dB αmax Maximum insertion attenuation 470.00 750.00 798.00 858.00 — typ. @ 25 ˚C 897.5 MHz MHz MHz MHz α Attenuation 174.00 880.00 1710.00 1920.00 ... 230.00 MHz ... 915.00 MHz ... 1785.00 MHz ... 1980.00 MHz 37.0 26.0 25.0 30.0 40.0 41.0 28.0 34.0 — — — — dB dB dB dB Matching network (element values depend on PCB layout) Ls1 1 4 5 5 2 3 Lp2 Lp3 Please read cautions and warnings and important notes at the end of this document. 5 Ls4 Ls1 Lp2 Lp3 Ls4 = 16 nH = 20 nH = 15 nH = 20 nH Q factor of inductors: 40 @ 770 MHz August 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Maximum ratings Operable temperature range T Storage temperature range Tstg DC voltage ESD voltage Source power at GSM 900 Tx band 1) VDC VESD PIN –30/+85 –40/+85 ˚C ˚C 5 1001) V V 21 dBm machine model, 10 pulses effective power in the on-state, duty cycle 2:8 acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Transfer function Please read cautions and warnings and important notes at the end of this document. 6 August 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet Transfer function (pass band) Transfer function (wide band) Please read cautions and warnings and important notes at the end of this document. 7 August 31, 2009 SAW Components B8766 897.5 MHz SAW band–stop filter Data Sheet References Type B8766 Ordering code B39901-B8766-P810 Marking and package C61157-A8-A17 Packaging F61074-V8212-Z000 Date code L_1126 LU31A_WB_UN.s4p (unmatched) S-parameters LU31A_WB.s2p (matched) See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2009. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 August 31, 2009 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 9 August 31, 2009