A70/SMA70 10 TO 250 MHz CASCADABLE AMPLIFIER · VERY LOW NOISE: 1.6 dB (TYP.) · HIGH EFFICIENCY: +8.0 dBm (TYP.) OUTPUT POWER @ 10 mA (TYP.) Typical Performance @ 25°C Specifications (Rev. Date: 11/00)* Characteristics Typical Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) Guaranteed 0°° to 50°°C -54°° to +85°°C 10-300 MHz 10-250 MHz 10-250 MHz 8.0 dB 6.8 dB 7.3 dB ±0.5 dB ±0.3 dB ±0.7 dB 11 dB 1.6 dB 2.8 dB 2.3 dB 7.0 dBm 8.0 dBm 7.5 dBm +24 dBm +37 dBm +44 dBm 1.8:1 / 1.8:1 2.1:1 / 2.1:1 2.3:1 / 2.3:1 10 mA 13 mA 12 mA * 1. CA70 is a standard A70 installed in a miniature SMA connector housing and guaranteed over 0° C to 50° C temperature range. Measured in a 50-ohm system at +15 Vdc Nominal. Subject to change without notice. Absolute Maximum Ratings Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power (1 minute max.) Max. Peak Power (3 µsec max.) “S” Series Burn-in Temperature (Case) -62° to +125°C 125°C +18 Volts +13 dBm 50 mW 0.5 W 125°C Thermal Data: Vcc = 15 Vdc Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc 130°C/W 0.064 W 8°C Outline Drawings Package Figure Model TO-8 BG A70 Surface Mount AA SMA70 SMA Connectorized CE CA70 Specifications subject to change without notice. • North America: 1-800-366-2266 Visit www.macom.com for complete contact and product information.