CORCOM Product Guide Accessory Outlet Filter EBF Series UL Recognized CSA Certified VDE Approved EBF1 EBF4 EBF Series Specifications The EBF accessory outlet filters provides an innovative means of connecting accessories while filtering noise between a system and the accessories attached. These filters provide enhanced performance utilizing common mode inductance and differential mode capacitance for attenuation of noise across the frequency range. The filtered connector offers the additional advantage of a grounded connection and features low leakage current required for international usage. Electrical Schematic @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: .25 mA .50 mA 1500 VAC 1450 VDC 50/60 Hz Rated voltage (max.): Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit 250 VAC Current Rating .05 .15 Frequency-MHz .5 1 5 10 30 1A 3A 6A 10A 23 10 1 1 32 19 10 5 41 30 22 14 47 50 48 38 40 47 47 47 47 36 28 20 47 48 42 32 Line-to-line in 50 ohm circuit ACCESSORY OUTLET LINE Maximum leakage current,each line-to-ground Current Rating .15 .5 Frequency-MHz 1 3 5 10 30 1A 3A 6A 10A 3 2 2 2 14 11 10 10 23 14 14 16 44 40 40 40 41 25 20 19 47 38 33 19 50 44 42 39 Resistor location for reference only. 28 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Accessory Outlet Filter (Continued) EBF Series RFI Power Line Filters Case Styles Case Dimensions Part No. EBF1 0.126 Dia. EBF1 C D E EBF4 B (max) C (max) 2.57 65.3 2.09 53.01 1.33 33.8 1.39 35.31 1.10 25.4 1.16 29.46 Holes: .07 [1.8] Dia.(2) Mounting Holes: .132 [3.35] Dia. (2) with .236 Dia. x 90˚ countersunk for #4 Flathead Screw 1.575 40.01 1.575 40.01 E (max) 1.99 50.5 1.99 50.5 Part Numbers 01EBF1 03EBF1 06EBF1 10EBF1 EBF4 E D D ± .010 ± .25 B A Typical dimensions: Terminals: .250 [6.35] (3) Slot: .07 x .16 [1.8 x 4.1] A (max) A 01EBF4 03EBF4 06EBF4 10EBF4 B C Wire 18 AWG 10" length Recommended Panel Cutout 1.01* 25.7 1.40 35.6 1.575 ± .004 40.0 ± 0.1 Front mount only .14 3.6 Dia. .20 5.1 R Typ. * +.008 -.000 29 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com