MA-COM EKIN2-70D

E-Series I/Q Demodulator
70 MHz
EKIN2-70D
V3
Features
•
•
•
•
SM - 28 Package
Excellent Phase and Amplitude Balance
LO Power + 10 dBm Typical
Surface Mount
Tape and reel packaging available
Description
M/A-COM’s EKIN2-70D is a passive, high performance surface mount Demodulator. It is ideally suited
for IF Demodulation in Cellular Base Stations. Typical system applications include GSM, DCS1800, WCDMA, and PCS air interfaces.Parts are packaged
in tape & reel.
Electrical Specifications: TA = 25°C, Z0 = 50Ω
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
LO & RF Frequency
—
70
MHz
—
—
—
I/Q Frequency
—
DC - 5
MHz
—
—
—
Amplitude Unbalance
—
70
dB
—
0.2
1.0
Phase Unbalance
—
70
Degrees
—
0.5°
2°
LO to RF Isolation
—
70
dB
50
65
—
Conversion Loss
—
70
dB
—
8.0
9.0
(LO) Carrier Power
—
70
dBm
—
+10 ± 2
—
Q = I -90° for RF > LO
Ordering Information
Part Number
Package
EKIN2-70DTR
Tape and Reel (300 piece Reel)
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
E-Series I/Q Demodulator
70 MHz
EKIN2-70D
V3
Absolute Maximum Ratings 1
Pin Configuration
Parameter
Absolute Maximum
Pin No.
Function
DC Offset Voltage
1 mV Typical
1
LO
RF Power (1 dB Compression)
+4 dBm Maximum
2
Case Ground
Impedance
50 Ohms Nominal
3
Case Ground
Operating Temperature
-40°C to +85°C
4
Case Ground
Storage Temperature
-55°C to +125°C
5
I
6
Q
7
Case Ground
8
RF
1. Operation of this device above any one of these parameters
may cause permanent damage.
Typical Performance Curves
Phase Unbalance
Amplitude Unbalance
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.