E-Series RF 1:4 Transmission Line Step-up Transformer 6 – 1000 MHz Features • • • • ETC4-1T-7 V4 SM - 22 Package 1:4 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available Description M/A-COM’s ETC4-1T-7 is a 1:4 RF transmission line step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 6 - 1000 MHz — — — Insertion Loss FL—fU 6 - 600 600 - 1000 dB — — — — 2.0 3.0 Amplitude Unbalance FL—fU 6 - 1000 dB — — 1.0 Phase Unbalance FL—fU 6 - 1000 Degrees — — 10 Absolute Maximum Ratings 1 Ordering Information Parameter Absolute Maximum Part Number Package RF Power 250 mW ETC4-1T-7TR Tape and Reel (2000 piece Reel) DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series RF 1:4 Transmission Line Step-up Transformer 6 – 1000 MHz Pin Configuration ETC4-1T-7 V4 Schematic Pin No. Function 1 Secondary Dot 2 Secondary CT 3 Secondary 4 Primary 5 Primary Dot Primary Dot 5 1 Secondary Dot 2 Secondary CT Primary 4 3 Secondary Typical Performance Curves Insertion Loss Phase Unbalance 0.00 -0.50 -1.00 dBm -1.50 -2.00 -2.50 -3.00 -3.50 -4.00 6.00 106.00 206.00 306.00 406.00 506.00 606.00 706.00 806.00 906.00 MHz Amplitude Unbalance Input Impedance 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.