AM42-0007-DIE GaAs MMIC Power Amplifier, 2 W 14.0 - 14.5 GHz Features • • • • • • • Rev. V5 Functional Schematic High Linear Gain: 22 dB Typical. High Saturated Output Power: +33 dBm Typical High Power Added Efficiency: 22% Typical High P1dB: +32 dBm Typical 50 Ω Input / Output Broadband Matched Integrated Output Power Detector High Performance Ceramic Bolt Down Package Description M/A-COM’s AM42-0007-DIE is a three stage MMIC linear power amplifier fabricated on a mature 0.5 micron MBE based GaAs process. The AM42-0007DIE employs a fully matched chip with integral bias networks and output power detector. This GaAs MMIC power amplifier is ideally suited for used as an output stage or driver in applications for VSAT applications. Ordering Information Part Number Package AM42-0007-DIE DIE Absolute Maximum Ratings 1,2 Parameter Absolute Maximum VDD +12 Volts VGG -10 Volts Power Dissipation 17.9 W RF Input Power +23 dBm ChannelTemperature +150 °C Storage Temperature -65 °C to +150 °C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. Back of die temperature (TB) = +25°C. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM42-0007-DIE GaAs MMIC Power Amplifier, 2 W 14.0 - 14.5 GHz Rev. V5 Typical Bias Configuration 3,4 3. Nominal bias is obtained by first connecting –5 volts to pin VGG (resistor network used) followed by connecting +9 volts to pin VDD. Note sequence. 4. It is recommended that the die be mounted with Au/Sn eutectic performs for good RF ground and thermal interface. Electrical Specifications 5: TB = +25°C , VDD = +9 V, VGG = -1.2V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Linear Gain PIN < 0 dBm dB — 22 — Input VSWR — Ratio — 2.5:1 — Output VSWR — Ratio — 2.7:1 — Saturated Output Power PIN < +14 dBm dBm — +33 — Output Power @ 1 dB Compression — dBm 31 +32 — Output IP3 — dBm — 41 — Power Added Efficiency (PAE) PIN < +14 dBm % — 22 — Bias Current IDSQ (No RF) IGG (No RF) mA mA — 850 0.1 — Thermal Resistance θ CB26 °C/W — 7 — Detector Output Voltage (VDET) Pin = +3 dBm, Ids = 750 mA Typ. V — +3.5 — 5. 100% on wafer tested (50 µs pulse width, 20% duty factor) without resistor network on gates. 6. Channel to die backside. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM42-0007-DIE GaAs MMIC Power Amplifier, 2 W 14.0 - 14.5 GHz Rev. V5 Typical Performance @ 25°C Linear Gain vs. Frequency Input & Output Return Loss vs. Frequency 0 30 S11 S22 20 -5 10 -10 0 -15 -10 -20 12 13 14 15 16 17 12 13 14 15 16 17 Frequency (GHz) Frequency (GHz) Power Added Efficiency vs. Input Power @ 14 GHz Output Power vs. Input Power @ 14 GHz 35 50 33 40 31 30 29 20 27 10 0 25 4 6 8 10 12 4 14 6 50 34 40 33 30 32 20 31 10 14.1 14.3 Frequency (GHz) 12 14 PAE vs. Frequency @ PIN = +14 dBm 35 13.9 10 IN Output Power vs. Frequency @ PIN = +14 dBm 30 13.7 8 P (dBm) Input Power (dBm) 14.5 14.7 0 13.7 13.9 14.1 14.3 14.5 14.7 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.