PANJIT SS12L

SS12L SERIES
LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER
20 to 40 Volts
VOLTAGE
1.0 Amperes
CURRENT
0.062(1.60)
0.047(1.20)
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier. majority carrier conduction
• Low power loss,high efficiency
• High surge capacity
• High current capacity, low VF
• For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
• In compliance with EU RoHS 2002/95/EC directives
0.181(4.60)
0.157(4.00)
0 . 012(0 . 305)
0 . 006(0.152)
MECHANICAL DATA
•
•
•
•
•
0.114(2.90)
0.098(2.50)
FEATURES
0.008(0.203)
0.002(0.051)
0.060(1.52)
0.030(0.76)
Case: JEDEC DO-214AC molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode end
Standard packaging: 12mm tape (EIA-481)
Weight: 0.0023 ounce, 0.0679 gram
0.208(5.28)
0.188(4.80)
MAXIMUM RATINGS(TA=25oC unless otherwise noted)
PARAMETER
SYMBOL
SS12L
SS13L
SS14L
UNIT
Maximum repetitive peak reverse voltage
VRRM
20
30
40
V
Maximum rms voltage
VRMS
14
21
28
V
Maximum dc blocking voltage
VDC
20
30
40
V
Maximum average forward rectified current at TL=110oC
I F(AV)
1
A
Peak forward surge current : 8.3ms single half sine-wave
superimposed on rated load
I FSM
30
A
Maximum Thermal Resistance (Note 1)
RΘJA
RΘJL
120
28
TJ
-55 to + 125
o
C
TSTG
-55 to + 150
o
C
Operating junction temperature range
Storage temperature range
o
C/W
ELECTRICAL CHARACTERISTICS(TA=25oC unless otherwise noted)
PARAMETER
SYMBOL
Maximum instantaneous forward voltage
(Note 2)
VF
Maximum reverse current at rated peak
reverse voltage (Note 2)
IR
TEST CONDITIONS
SS12L
SS13L
SS14L
UNIT
I F=0.1A
I F=1.0A
TJ=25oC
0.31
0.42
V
I F=0.1A
I F=1.0A
TJ=125oC
0.16
0.33
V
TJ=25oC
TJ=100oC
0.2
10
0.5
25
mA
NOTES:
1. P.C.B. mounted on 0.2 x 0.2” (5.0 x 5.0 mm) copper pad areas.
2. Pulse test : 300μs pulse width, 1% duty cycle.
December 8,2010-REV.00
PAGE . 1
IF, Forward Current (A)
1.0
0.8
0.6
0.4
Mounted on P.C.B with 5x5mm
copper pad areas
0.2
0.0
0
25
50
75
100
125
CJ, Junction Capacitance (pF)
SS12L SERIES
1000
100
10
0.1
Fig.1 Forward Current Derating Curve
10
100
Fig.2 Typical Junction Capacitance
100
IR,Reverse Current (mA)
1
IR,Reverse Current (mA)
1
VR, Reverse Bias Voltage (V)
TL, Lead Temperature (°C)
40V
0.1
30V
20V
TJ = 25°C
0.01
40V
10
30V
20V
TJ = 100°C
1
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig.3 Typical Reverse Characteristics
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig.4 Typical Reverse Characteristics
IF, Forward Current (A)
10
TJ = 125°C
1
TJ = 25°C
TJ = 100°C
TJ = 75°C
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
VF, Forward Voltage (V)
Fig.5 Typical Forward Characteristics
December 8,2010-REV.00
PAGE . 2
SS12L SERIES
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 7.5K per 13" plastic Reel
T/R - 1.8Kper 7” plastic Reel
LEGAL STATEMENT
Copyright PanJit International, Inc 2010
The information presented in this document is believed to be accurate and reliable. The specifications and information herein
are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit
does not convey any license under its patent rights or rights of others.
December 8,2010-REV.00
PAGE . 3