SL02, SL03, SL04 Vishay Semiconductors Small Signal Schottky Diodes Features • • • • • For surface mounted applications Low-profile package Ideal for automated placement Low power loss, high efficiency High temperature soldering: 260 °C/10 s at terminals • Wave and reflow solderable • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 17249 Mechanical Data Case: DO-219AB (SMF) Polarity: color band denotes cathode end Weight: approx. 15 mg Packaging codes/options: GS18/10 k per 13" reel (8 mm tape), 50 k/box GS08/3 k per 7" reel (8 mm tape), 30 k/box Parts Table Part Ordering code Marking Remarks SL02 SL02-GS18 or SL02-GS08 S2 Tape and reel SL03 SL03-GS18 or SL03-GS08 S3 Tape and reel SL04 SL04-GS18 or SL04-GS08 S4 Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave Document Number 85687 Rev. 1.9, 23-Jul-10 Ttp = 109 °C Part Symbol Value Unit SL02 VRRM 20 V SL03 VRRM 30 V SL04 VRRM 40 V SL02 VRMS 14 V SL03 VRMS 21 V SL04 VRMS 28 V SL02 VDC 20 V SL03 VDC 30 V SL04 VDC 40 V IF(AV) 1.1 A IFSM 40 A For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 SL02, SL03, SL04 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 180 K/W Maximum operating junction temperature Tj 125 °C Storage temperature range Tstg - 55 to 150 °C Thermal resistance junction to ambient air 1) Note: 1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads (≥ 40 µm thick) Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Instaneous forward voltage Typical instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage IF = 0.5 A 1) Part Symbol Typ. Max Unit SL02 VF Min 0.360 0.385 V SL03 VF 0.395 0.43 V 0.51 SL04 VF 0.450 SL02 VF 0.420 V IF = 1.1 A SL03 VF 0.450 V SL04 VF 0.530 TA = 25 °C SL02 IR TA = 100 °C SL02 TA = 25 °C V V 250 μA IR 8 mA SL03 IR 130 μA TA = 100 °C SL03 IR 6 mA TA = 25 °C SL04 IR 20 μA TA = 100 °C SL04 IR 6 mA Note: 1) Pulse test: 300 µs pulse width, 1 % duty cycle www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85687 [email protected], [email protected], [email protected] Rev. 1.9, 23-Jul-10 SL02, SL03, SL04 Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified 10 000 Instantaneous Reverse Current (µA) Average Forward Current (A) 1.5 1.0 0.5 Tj = 100 °C Tj = 50 °C 100 Tj = 25 °C 10 0 1 0 10 30 17379 50 70 90 110 130 150 5 25 15 20 10 Reverse Voltage (V) Figure 4. Typical Reverse Current Characteristics - SL02 10 Instantaneous Forward Current (A) 250 Junction Capacitance (pF) 0 17382 Lead Temperature (°C) Figure 1. Forward Current Derating Curve 200 150 100 SL02 50 SL04 Tj = 100 °C 1 Tj = 75 °C 0.1 Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle 0.0001 10 0 2 17380 8 6 4 Reverse Voltage (V) 10 0 12 Figure 2. Typical Junction Capacitance 17383 0.8 0.6 1.0 0.4 0.2 Instantaneous Forward Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics - SL03 10 000 Tj = 100 °C 1 Tj = 75 °C 0.1 Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle Instantaneous Reverse Current (µA) 10 Instantaneous Forward Current (A) Tj = 75 °C 1000 Tj = 100 °C 1000 Tj = 75 °C 100 Tj = 50 °C 10 Tj = 25 °C 1 0.1 0.0001 0 17381 0.8 0.2 1.0 0.4 0.6 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characterisics - SL02 Document Number 85687 Rev. 1.9, 23-Jul-10 0 17384 5 10 15 20 25 Reverse Voltage (V) 30 35 Figure 6. Typical Reverse Current Characteristics - SL03 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 SL02, SL03, SL04 Vishay Semiconductors Package Dimensions in millimeters (inches): DO-219AB 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 1.7 (0.067) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number 85687 [email protected], [email protected], [email protected] Rev. 1.9, 23-Jul-10 SL02, SL03, SL04 Vishay Semiconductors Blistertape Dimensions for SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number 85687 Rev. 1.9, 23-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000