Obsolete EL/EB www.vishay.com Vishay Roederstein Aluminum Capacitors Axial Capacitors Style FEATURES • • • • • Polarized aluminum electrolytic capacitors Standard dimensions Charge/discharge proof High ripple current capability Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General purpose, industrial electronics and audio/video systems • Coupling, smoothing, filtering, buffering and timing • Portable and mobile units • Vibration and shock resistant QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L) Rated capacitance range CR Capacitance tolerance Rated voltage range Category temperature range Endurance test at upper category temp. Useful life at 105 °C and IR applied Useful life at 85 °C and IR applied Useful life at 40 °C and IR applied Failure rate (0.8 UR, 40 °C) Based on sectional specifications Based on detailed specifications Climatic category IEC 60068 DIN 40040 UNIT mm μF % V °C h h h h 10-9/h 3.3 x 8 to 3.3 x 11 0.47 to 10 6.3 to 63 1500 40 000 550 LOW VOLTAGE 4.5 x 11 6 x 10 to 10 x 25 0.47 to 47 4.7 to 1000 - 10 to + 50 10 to 100 6.3 to 100 - 40 to + 85 1000 (750) (1000) 3000 85 000 105 IEC 384-4, CECC 30300 Similar to CECC 30301-044 HIGH VOLTAGE 6.5 x 18 to 10 x 25 1 to 22 160 to 385 - 40 to + 85 2000 5000 130 000 70 40/085/56 GPF 40/085/56 GPF SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) 100 V 25 40 CR (μF) 6.3 10 16 0.47 1.0 EL 3.3 x 11 2.2 3.3 x 8 3.3 x 11 4.7 3.3 x 8 3.3 x 11 3.3 x 11 10 3.3 x 8 3.3 x 11 3.3 x 11 4.5 x 11 4.5 x 11 22 4.5 x 11 4.5 x 11 50 63 3.3 x 8 3.3 x 11 3.3 x 8 4.5 x 11 3.3 x 11 4.5 x 11 UR (V) > 100 V 250 350 100 160 385 4.5 x 11 - - - - 4.5 x 11 6.5 x 18 4.5 x 11 6.5 x 18 8 x 18 4.5 x 11 6.5 x 18 8 x 18 10 x 18 10 x 25 8 x 18 10 x 25 - - EB 10 x 25 - - - 47 4.5 x 11 - - - - - - - - - 100 6 x 10 6.5 x 18 8 x 18 10 x 18 10 x 25 - - - - - 220 470 1000 EB 8 x 18 10 x 25 6.5 x 18 10 x 18 10 x 25 8 x 18 10 x 18 10 x 25 10 x 18 10 x 25 - 10 x 18 - - - - - - - - Revision: 13-Apr-12 Document Number: 25113 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete EL/EB www.vishay.com Vishay Roederstein DIMENSIONS in millimeters AND AVAILABLE FORMS B L + ØD Ød Ød L A ØD AXIAL STYLE: DIMENSIONS in millimeters, MASS, PACKAGING QUANTITIES AND ORDERING CODE PACKAGING, ENDING OF ORDERING CODE, QUANTITIES NOMINAL CASE SIZE ØDxL Ød Ø Dmax. Lmax. Amin. B MASS APPROX. g CODE PCS. CODE PCS. 3.3 x 8 0.6 3.5 9.0 12.5 63.5 ± 1.5 0.3 ..A0W 4000 ..B0W 1000 3.3 x 11 0.6 3.5 12.0 15 63.5 ± 1.5 0.35 ..A0W 3000 ..B0W 1000 TAPED ON REEL TAPED AMMO 4.5 x 11 0.6 5.0 11.5 15 63.5 ± 1.5 0.5 ..A0W 3000 ..B0W 1000 6 x 10 0.6 6.3 10.5 15 63.5 ± 1.5 0.7 ..A0W 1000 ..B0W 1000 6.5 x 18 0.8 6.9 18.5 25 73.0 ± 1.6 1.3 ..A0W 1000 ..B0W 1000 8 x 18 0.8 8.5 18.5 25 73.0 ± 1.6 1.7 ..A0W 500 ..B0W 500 10 x 18 0.8 10.5 18.5 25 73.0 ± 1.6 2.5 ..A0W 500 ..B0W 500 10 x 25 0.8 10.5 25.0 30 73.0 ± 1.6 3.3 ..A0W 500 ..B0W 500 Note • Axial style capacitors are insulated. ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION The following table gives the ordering number. CR Rated capacitance at 100 Hz The 16th place of ordering code refers to packaging for axial lead capacitors: UR Rated voltage MALAEB000GD410C... tan Max. dissipation factor at 100 Hz MALAEB000GD410CA0W A = taped on reel RESR Equivalent series resistance at 100 Hz (calculated from tan max. and CR) MALAEB000GD410CB0W B = taped ammo Z Max. impedance at 10 kHz IR Rated alternating current (RMS) at 100 Hz and upper category temperature TA Ambient temperature TUC Upper category temperature RH Relative humidity P Ambient pressure EB 1000 μF 10 V 10 x 25 Note • Unless otherwise specified, all electrical values apply at TA = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 13-Apr-12 Document Number: 25113 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete EL/EB www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 40 50 63 100 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) tan 100 Hz MAX. RESR 100 Hz () Z 10 kHz MAX. () IR 100 Hz TUC (A) CATALOG NUMBER MALA... 10 3.3 x 8 0.30 47.7 20.0 0.011 EL000AN210BB0W 10 3.3 x 11 0.30 47.7 20.0 0.015 EL000AA210BB0W 470 8 x 18 0.25 0.847 0.430 0.33 EB000FL347BB0W 1000 10 x 25 0.25 0.398 0.200 0.56 EB000GD410BB0W 22 4.5 x 11 0.20 14.5 7.30 0.045 EL000BA222CB0W 47 4.5 x 11 0.20 6.78 3.40 0.070 EL000BA247CB0W 100 6 x 10 0.20 3.19 1.60 0.11 EB000CK310CB0W 220 6.5 x 18 0.20 1.45 0.730 0.21 EB000DL322CB0W 470 10 x 18 0.20 0.680 0.340 0.41 EB000GL347CB0W 1000 10 x 25 0.20 0.320 0.160 0.56 EB000GD410CB0W 4.7 3.3 x 8 0.20 68.0 26.0 0.009 EL000AN147DB0W 4.7 3.3 x 11 0.20 67.8 26.0 0.015 EL000AA147DB0W 10 3.3 x 11 0.20 32.0 12.0 0.016 EL000AA210DB0W 220 8 x 18 0.16 1.16 0.550 0.27 EB000FL322DB0W 470 10 x 18 0.16 0.540 0.280 0.41 EB000GL347DB0W 1000 10 x 25 0.16 0.260 0.130 0.55 EB000GD410DB0W 10 4.5 x 11 0.14 22.300 9.000 0.05 EL000BA210EB0W 22 4.5 x 11 0.14 10.200 4.100 0.06 EL000BA222EB0W 100 6.5 x 18 0.14 2.200 0.900 0.16 EB000DL310EB0W 220 10 x 18 0.14 1.000 0.410 0.35 EB000GL322EB0W 470 10 x 25 0.14 0.470 0.190 0.50 EB000GD347EB0W 1.0 3.3 x 11 0.16 239 75.0 0.008 EL000AA110GB0W 2.2 3.3 x 8 0.16 120 32.0 0.007 EL000AN122Gb0W 2.2 3.3 x 11 0.16 109 32.0 0.012 EL000AA122GB0W 4.7 3.3 x 11 0.16 54.000 15.000 0.013 EL000AA147GB0W 10 4.5 x 11 0.11 17.600 7.000 0.05 EL000BA210GB0W 100 8 x 18 0.11 1.750 0.700 0.22 EB000FL310GB0W 220 10 x 18 0.12 0.870 0.340 0.36 EB000GL322GB0W 100 10 x 18 0.10 1.60 0.650 0.25 EB000GL310HB0W 0.47 3.3 x 8 0.10 340 120 0.004 EL000AN047JB0W 0.47 3.3 x 11 0.10 339 117 0.008 EL000AA047JB0W 1.0 3.3 x 8 0.12 190.000 55.000 0.006 EL000AN110JB0W 1.0 4.5 x 11 0.09 143.000 55.000 0.013 EL000BA110JB0W 2.2 3.3 x 11 0.14 87.000 25.000 0.011 EL000AA122JB0W 2.2 4.5 x 11 0.09 66.000 25.000 0.025 EL000BA122JB0W 4.7 4.5 x 11 0.09 31.000 12.000 0.040 EL000BA147JB0W 100 10 x 25 0.08 1.270 0.550 0.30 EB000GD310JB0W 0.47 4.5 x 11 0.08 271 96.0 0.009 EL000BA047LB0W 1.0 4.5 x 11 0.08 128 45.0 0.020 EL000BA110LB0W 2.2 4.5 x 11 0.08 57.9 21.0 0.030 EL000BA122LB0W Revision: 13-Apr-12 Document Number: 25113 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete EL/EB www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 160 250 350 385 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) tan 100 Hz MAX. RESR 100 Hz () Z 10 kHz MAX. () IR 100 Hz TUC (A) CATALOG NUMBER MALA... 4.7 6.5 x 18 0.15 51.0 26.0 0.050 EB000DL147MB0W 10 8 x 18 0.15 24.0 12.0 0.070 EB000FL210MB0W 22 10 x 25 0.15 11.0 5.50 0.19 EB000GD222MB0W 2.2 6.5 x 18 0.10 72.0 50.0 0.035 EB000DL122NB0W 4.7 8 x 18 0.10 34.0 23.0 0.055 EB000FL147NB0W 10 10 x 25 0.10 16.0 11.0 0.090 EB000GD210NB0W 4.7 10 x 18 0.10 34.0 22.0 0.060 EB000GL147OB0W 1.0 6.5 x 18 0.10 160 100 0.020 EB000DL110RB0W 2.2 8 x 18 0.10 72.0 45.0 0.040 EB000FL122RB0W 4.7 10 x 25 0.10 34.0 22.0 0.070 EB000GD147RB0W ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE UR 100 V Us = 1.15 x UR UR 160 V Us = 1.10 x UR - Urev 1 V Voltage Surge voltage Reverse voltage Current UR 100 V UR 160 V Leakage current IL/μA 0.0015 x CR/μF x UR/V + 3 IL/μA 0.0150 x CR/μF x UR/V + 10 UR, 300 s UR, 300 s LOW TEMPERATURE BEHAVIOUR Table for the calculation of the maximum 10 kHz impedance at low temperatures: Tabular value Z 10 kHz = ---------------------------------------C R μF RATED VOLTAGE (V) TA (°C) 6.3 10 16 25 40 50 63 100 160 250 350 385 - 25 1300 1000 860 440 330 270 200 160 1000 940 860 1800 - 40 4800 3500 2400 1200 990 800 550 500 5000 4600 4200 6000 Note • In practical operation the lower limit of the series resistance and impedance is given by the ohmic part of the contact points and the foil resistance values. Therefore it will not always be possible to achieve calculated values below 0.05 . Revision: 13-Apr-12 Document Number: 25113 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete EL/EB www.vishay.com Vishay Roederstein LIFETIME TABLE UR 100 V INTERRELATION BETWEEN ALTERNATING CURRENT, AMBIENT TEMPERATURE AND LIFETIME I/IR (frequency dependent) FREQUENCY [Hz] 100 250 500 1000 2500 0 0 0 0 0 0.20 0.22 0.23 0.24 0.25 0.40 0.44 0.46 0.48 0.50 0.60 0.66 0.69 0.72 0.75 0.80 0.88 0.92 0.96 1.00 1.00 1.10 1.15 1.20 1.25 1.20 1.32 1.38 1.44 1.50 1.40 1.54 1.61 1.68 1.75 1.60 1.76 1.84 1.92 2.00 1.80 1.98 2.07 2.16 2.25 2.00 2.20 2.30 2.40 2.50 2.20 2.42 2.53 2.64 2.75 2.40 2.64 2.76 2.88 3.00 2.60 2.86 2.99 3.12 3.25 2.80 3.08 3.22 3.36 3.50 3.00 3.30 3.45 3.60 3.75 3.20 3.52 3.68 3.84 4.00 3.40 3.74 3.91 4.08 4.25 3.60 3.96 4.14 4.32 4.50 3.80 4.18 4.37 4.56 4.75 LIFETIME MULTIPLIER L (depending on I/IR and TA) AMBIENT TEMPERATURE TA [°C] 40 45 50 55 60 65 70 75 80 85 90 95 100 56 35 23 15 9.7 6.4 4.3 3.0 2.0 1.42 1.00 0.71 0.51 54 34 22 14 9.4 6.3 4.2 2.9 2.0 1.40 0.98 0.70 0.50 49 31 20 13 8.8 5.9 4.0 2.7 1.9 1.33 0.94 0.67 0.48 43 28 18 12 8.0 5.4 3.7 2.5 1.8 1.24 0.88 0.63 0.45 36 24 16 10 7.0 4.8 3.3 2.3 1.6 1.13 0.80 0.58 0.42 29 19 13 8.8 6.0 4.1 2.9 2.0 1.4 1.00 0.72 0.52 0.38 23 16 11 7.3 5.0 3.5 2.4 1.7 1.2 0.88 0.63 0.46 0.34 18 12 8.5 5.9 4.1 2.9 2.0 1.5 1.0 0.75 0.55 0.40 0.29 13 9.4 6.6 4.7 3.3 2.3 1.7 1.2 0.87 0.64 0.47 0.34 10 7.1 5.1 3.6 2.6 1.9 1.4 1.0 0.72 0.53 0.39 0.29 7.3 5.3 3.8 2.8 2.0 1.5 1.1 0.80 0.59 0.43 0.32 5.3 3.9 2.9 2.1 1.6 1.2 0.85 0.63 0.47 0.35 3.8 2.8 2.1 1.6 1.2 0.89 0.66 0.50 0.37 0.28 2.7 2.1 1.6 1.2 0.89 0.67 0.51 0.39 0.29 1.9 1.5 1.1 0.87 0.67 0.51 0.39 0.30 1.4 1.1 0.82 0.64 0.49 0.38 0.30 0.95 0.75 0.59 0.46 0.36 0.28 combination not permitted 0.66 0.53 0.42 0.34 0.46 0.37 0.32 50 10K 0 0 0.18 0.26 0.36 0.52 0.54 0.78 0.72 1.04 0.90 1.30 1.08 1.56 1.26 1.82 1.44 2.08 1.62 2.34 1.80 2.60 1.98 2.86 2.16 3.12 2.34 3.38 2.52 3.64 2.70 3.90 2.88 4.16 3.06 4.42 3.24 4.68 3.42 4.94 Note IR Rated ripple current (100 Hz, RMS) [A] at upper category temperature TUC taken from datasheet I User ripple current [A] TA Ambient temperature of capacitor [°C] L Lifetime multiplier Regard L as a function of ambient temperature (x-axis) and of current (y-axis); use the current-axis according to the frequency 105 0.37 0.36 0.35 0.33 0.31 0.28 LIFETIME TABLE UR > 100 V INTERRELATION BETWEEN ALTERNATING CURRENT, AMBIENT TEMPERATURE AND LIFETIME I/IR (frequency dependent) FREQUENCY [Hz] 250 500 1000 2500 0 0 0 0 0.23 0.25 0.26 0.27 0.46 0.50 0.52 0.54 0.70 0.74 0.78 0.80 0.93 0.99 1.04 1.07 1.16 1.24 1.30 1.34 1.39 1.49 1.56 1.61 1.62 1.74 1.82 1.88 1.86 1.98 2.08 2.14 2.09 2.23 2.34 2.41 2.32 2.48 2.60 2.68 2.55 2.73 2.86 2.95 2.78 2.98 3.12 3.22 3.02 3.22 3.38 3.48 LIFETIME MULTIPLIER L (depending on I/IR and TA) AMBIENT TEMPERATURE TA [°C] 45 50 55 60 65 70 75 80 85 42 27 17 11 8 5.1 3.5 2.42 1.69 40 26 17 11 7 5.0 3.4 2.35 1.64 35 23 15 10 6.7 4.6 3.1 2.18 1.53 29 19 13 8.7 5.9 4.0 2.8 1.95 1.37 23 16 11 7.2 4.9 3.4 2.4 1.68 1.19 17 12 8.3 5.7 4.0 2.8 2.0 1.40 1.00 13 9.0 6.3 4.4 3.1 2.2 1.6 1.14 9.2 6.5 4.7 3.3 2.4 1.7 1.2 6.4 4.7 3.4 2.5 1.8 1.3 4.4 3.2 2.4 1.8 1.3 3.0 2.2 1.7 1.2 2.0 1.5 1.1 combination not permitted 1.3 1.0 50 100 10K 40 0 0 0 66 0.17 0.20 0.28 63 0.34 0.40 0.56 54 0.51 0.60 0.84 44 0.68 0.80 1.12 35 0.85 1.00 1.40 26 1.02 1.20 1.68 18 1.19 1.40 1.96 13 1.36 1.60 2.24 8.8 1.53 1.80 2.52 5.9 1.70 2.00 2.80 3.9 1.87 2.20 3.08 2.6 2.04 2.40 3.36 1.7 2.21 2.60 3.64 1.1 Note IR Rated ripple current (100 Hz, RMS) [A] at upper category temperature TUC taken from datasheet I User ripple current [A] TA Ambient temperature of capacitor [°C] L Lifetime multiplier Regard L as a function of ambient temperature (x-axis) and of current (y-axis); use the current-axis according to the frequency Revision: 13-Apr-12 Document Number: 25113 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Obsolete EL/EB www.vishay.com Vishay Roederstein TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 1300300, subclause 4.13 PROCEDURE (quick reference) TA = Upper cat. temp.; UR applied 6.3 V UR 100 V: 1000 h TA = 85 °C; UR applied 160 V UR 500 V: 2000 h TA = 105 °C; UR and IR applied 6.3 V UR 100 V Useful life CECC 30301, subclause 1.8.1 Case 4.5 x 11: 750 h Cases 6 x 10 to 10 x 25: 1000 h Cases 6 x 10 to 10 x 25: 1000 h TA = 85 °C; UR and IR applied 160 V UR 400 V: 5000 h Shelf life (storage at high temperature) Revision: 13-Apr-12 IEC 60348-4/ EN 1300300, subclause 4.17 TA = upper cat. temp.; no voltage applied 6.3 V UR 100 V Cases 3.3 x 8 to 10 x 25: 500 h After test: UR to be applied for 30 min 24 h to 48 h before measurement REQUIREMENTS UR = 6.3 V: - 40 % C/C 25 % UR = 6.3 V: - 30 % C/C 30 % tan 1.5 x spec. limit Z 3 x spec. limit IL (300 s) spec. limit UR = 6.3 V: - 50 % C/C 45 % UR = 6.3 V: - 45 % C/C 45 % tan 3 x spec. limit Z 3 x spec. limit IL (300 s) spec. limit No short or open circuit Total failure percentage: 1 % UR = 6.3 V: - 40 % C/C 25 % UR = 6.3 V: - 30 % C/C 30 % tan 1.5 x spec. limit Z 3 x spec. limit IL (300 s) 2 x spec. limit Document Number: 25113 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000