097 RLP 7 www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial Low Profile, 7 mm FEATURES • • • • 038 RSU Fig.0 Component 097 RLP 7 outlines. higher CV-values 7 mm lower height 5 mm 134 RLP 5 Fig. 1 APPLICATIONS • • • • QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4 x 7 to 6.3 x 7 Rated capacitance range, CR MARKING ± 20 % Rated voltage, UR 6.3 V to 63 V - 40 °C to + 85 °C Endurance test at 85 °C 1000 h Useful life at 85 °C 1500 h Useful life at 40 °C, 1.4 x IR applied 40 000 h Shelf life at 0 V, 85 °C 500 h Based on sectional specification General purpose; industrial, automotive and audio-video Low surface demand on printed-circuit board Coupling, decoupling, smoothing, filtering and timing Portable and mobile equipment (small size, low mass), low profile equipment 0.1 μF to 220 μF Tolerance on CR Category temperature range Useful life: 1500 h at 85 °C Low profile, 7 mm height Miniaturized, high CV-product per unit volume Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Charge and discharge proof • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 IEC 60384-4/EN 130300 Climatic category IEC 60068 40/085/56 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Rated voltage (in V) • Negative terminal identification • Code indicating factory of origin • Name of manufacturer • Date code, in accordance with IEC 60062 • Series number (097) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 6.3 10 16 25 35 50 63 0.10 - - - - - - 4x7 0.22 - - - - - - 4x7 0.47 - - - - - - 4x7 1.0 - - - - - - 4x7 2.2 - - - - - - 4x7 3.3 - - - - - 4x7 5x7 4.7 - - - - 4x7 5x7 6.3 x 7 10 - - 4x7 - 5x7 6.3 x 7 6.3 x 7 22 4x7 - 5x7 - 6.3 x 7 6.3 x 7 - 33 - 5x7 - 6.3 x 7 6.3 x 7 - - 47 5x7 - 6.3 x 7 6.3 x 7 - - - 100 - 6.3 x 7 6.3 x 7 - - - - 220 6.3 x 7 - - - - - - Revision: 12-Apr-13 Document Number: 28308 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 097 RLP 7 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD + F ± 0.5 15 min. 5 min. Ød Fig. 2 - Form CA: Long leads Fig. 3 - Form TFA: Taped in box (ammopack), formed leads, pitch F = 5 mm Fig. 4 - Form TNA: Taped in box (ammopack), pitch F = 2.5 mm DIMENSIONS in millimeters AND PACKAGING QUANTITIES PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød 4x7 71 5x7 6.3 x 7 Ø Dmax. Lmax. F 0.45 4.5 8 72 0.45 5.5 73 0.45 6.8 FORM CA FORM TFA FORM TNA 1.5 ± 0.5 2000 2000 2000 8 2.0 ± 0.5 1000 2000 2000 8 2.5 ± 0.5 1000 2000 2000 Note • For detailed tape dimensions please see www.vishay.com/doc?28360 Revision: 12-Apr-13 Document Number: 28308 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 097 RLP 7 www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 097 series DESCRIPTION CR Rated capacitance at 120 Hz, tolerance ± 20 % 100 μF/16 V; ± 20 % IR Rated RMS ripple current at 120 Hz, 85 °C Nominal case size: Ø 6.3 mm x 7 mm; form TFA Max. leakage current after 2 min at UR Ordering code: MAL209735101E6 Former 12NC: 2222 097 35101 IL2 tan Max. dissipation factor at 120 Hz Z Max. impedance at 100 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL2097....... UR (V) 6.3 10 16 25 35 50 63 CR 120 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 120 Hz 85 °C (mA) IL2 2 min (μA) tan 120 Hz 22 4x7 31 3 0.24 Z 100 kHz () 8.4 BULK LONG LEADS TAPED AMMOPACK FORM CA F (mm) FORM TFA F (mm) FORM TNA F (mm) 53229E6 1.5 33229E6 5.0 73229E6 2.5 47 5x7 47 3 0.24 4.6 53479E6 2.0 33479E6 5.0 73479E6 2.5 220 6.3 x 7 90 14 0.24 1.8 53221E6 2.5 33221E6 5.0 73221E6 2.5 33 5x7 43 4 0.20 3.7 54339E6 2.0 34339E6 5.0 74339E6 2.5 100 6.3 x 7 80 10 0.20 2.2 54101E6 2.5 34101E6 5.0 74101E6 2.5 10 4x7 25 3 0.16 10.0 55109E6 1.5 35109E6 5.0 75109E6 2.5 22 5x7 39 4 0.16 5.0 55229E6 2.0 35229E6 5.0 75229E6 2.5 47 6.3 x 7 59 8 0.16 3.5 55479E6 2.5 35479E6 5.0 75479E6 2.5 100 6.3 x 7 90 16 0.16 2.5 55101E6 2.5 35101E6 5.0 75101E6 2.5 33 6.3 x 7 53 9 0.14 2.6 56339E6 2.5 36339E6 5.0 76339E6 2.5 47 6.3 x 7 65 12 0.14 1.9 56479E6 2.5 36479E6 5.0 76479E6 2.5 4.7 4x7 20 3 0.12 10.0 50478E6 1.5 30478E6 5.0 70478E6 2.5 10 5x7 30 4 0.12 5.6 50109E6 2.0 30109E6 5.0 70109E6 2.5 22 6.3 x 7 47 8 0.12 3.0 50229E6 2.5 30229E6 5.0 70229E6 2.5 33 6.3 x 7 60 12 0.12 2.6 50339E6 2.5 30339E6 5.0 70339E6 2.5 3.3 4x7 18 3 0.10 14.0 51338E6 1.5 31338E6 5.0 71338E6 2.5 4.7 5x7 23 3 0.10 10.0 51478E6 2.0 31478E6 5.0 71478E6 2.5 10 6.3 x 7 34 5 0.10 5.5 51109E6 2.5 31109E6 5.0 71109E6 2.5 22 6.3 x 7 53 11 0.10 2.9 51229E6 2.5 31229E6 5.0 71229E6 2.5 0.10 4x7 1.3 3 0.08 170.0 58107E6 1.5 38107E6 5.0 78107E6 2.5 0.22 4x7 2.9 3 0.08 110.0 58227E6 1.5 38227E6 5.0 78227E6 2.5 0.47 4x7 7.9 3 0.08 66.0 58477E6 1.5 38477E6 5.0 78477E6 2.5 1.0 4x7 11 3 0.08 36.0 58108E6 1.5 38108E6 5.0 78108E6 2.5 2.2 4x7 17 3 0.08 19.0 58228E6 1.5 38228E6 5.0 78228E6 2.5 3.3 5x7 21 3 0.08 14.0 58338E6 2.0 38338E6 5.0 78338E6 2.5 4.7 6.3 x 7 26 3 0.08 10.0 58478E6 2.5 38478E6 5.0 78478E6 2.5 10 6.3 x 7 40 7 0.08 5.5 58109E6 2.5 38109E6 5.0 78109E6 2.5 Revision: 12-Apr-13 Document Number: 28308 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 097 RLP 7 www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 x UR Surge voltage Urev 1 V Reverse voltage Current After 2 min at UR IL2 0.01 CR x UR or 3 μA (whichever is greater) Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Leakage current Resistance Equivalent series resistance (ESR) RIPPLE CURRENT AND USEFUL LIFE CCC205 3.3 IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 Lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 0 4. 6 1.6 .0 15 20 30 70 40 (1) (1) 50 IA = Actual ripple current at 120 Hz IR = Rated ripple current at 120 Hz, 85 °C 1.2 1.0 0.8 0.5 0.0 10 1.4 50 60 70 80 90 100 Tamb (°C) Useful life at 85 °C and IR applied: 1500 h Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 1 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY Revision: 12-Apr-13 FREQUENCY (Hz) IR MULTIPLIER 50 0.60 120 1.00 400 1.20 800 1.30 2000 1.40 Document Number: 28308 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 097 RLP 7 www.vishay.com Vishay BCcomponents Table 2 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 130 300, subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 85 °C, UR applied; 1000 h C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 °C, UR and IR applied; 1500 h C/C: ± 50 % tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 3 % Shelf life (storage at high temperature) IEC 60384-4/ EN 130300, subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: For requirements see “Endurance test” above IL2 spec. limit Revision: 12-Apr-13 Document Number: 28308 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000