ISC-1210 Vishay Dale Surface Mount, Molded, Shielded Inductor FEATURES • Molded construction provides superior strength and moisture resistance. • Tape and reel packaging for automatic handling, 2000/ reel, EIA 481. • Compatible with vapor phase, infrared and wave soldering methods. • Shielded construction minimizes coupling to other components. STANDARD ELECTRICAL SPECIFICATIONS IND. (µH) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 TEST SELFRATED FREQ. RESONANT DCR DC Q L & Q FREQ. MIN. MAX. CURRENT TOL. MIN. (MHz) (MHz) (Ohms) (mA) ± 20% 50 50 1000 0.10 810 ± 20% 50 50 1000 0.11 750 ± 20% 50 50 1000 0.12 720 ± 20% 50 50 1000 0.13 690 ± 20% 45 50 1000 0.15 640 ± 20% 45 50 1000 0.17 610 ± 20% 45 50 1000 0.18 585 ± 20% 40 50 1000 0.24 530 ± 20% 40 50 1000 0.26 495 ± 20% 40 50 1000 0.28 485 ± 20% 40 50 1000 0.35 475 ± 20% 38 50 900 0.45 460 ± 20% 36 50 700 0.50 450 ± 20% 40 25.2 500 0.20 630 ± 20% 40 25.2 470 0.20 600 ± 20% 40 25.2 400 0.24 580 ± 20% 40 25.2 330 0.30 565 ± 20% 40 25.2 310 0.33 500 ± 20% 40 25.2 280 0.36 475 ± 20% 40 25.2 230 0.40 465 ± 20% 40 25.2 220 0.44 460 ± 20% 40 25.2 200 0.46 455 ± 20% 40 25.2 180 0.48 450 ± 20% 40 25.2 160 0.50 450 ± 10% 30 7.96 120 0.60 400 ± 10% 30 7.96 110 0.65 390 ± 10% 30 7.96 90.0 0.75 370 ± 10% 30 7.96 85.0 0.85 350 ± 10% 30 7.96 65.0 0.90 320 ± 10% 30 7.96 60.0 1.00 290 ± 10% 30 7.96 60.0 1.10 270 ± 10% 30 7.96 58.0 1.20 250 ± 10% 30 7.96 52.0 1.25 220 ± 10% 30 7.96 50.0 1.40 210 ± 10% 30 7.96 40.0 1.60 205 ± 10% 30 7.96 35.0 1.65 195 ± 10% 30 2.52 30.0 2.00 185 ± 10% 30 2.52 24.0 2.30 175 ± 10% 30 2.52 20.0 2.50 165 ± 10% 30 2.52 17.0 2.70 155 ± 10% 30 2.52 16.0 3.10 150 ± 10% 30 2.52 14.5 3.30 125 ± 10% 30 2.52 14.5 5.10 115 ± 10% 30 2.52 14.0 5.90 105 ± 10% 30 2.52 13.0 8.00 100 ± 10% 30 2.52 11.5 10.0 95 ± 10% 30 2.52 11.0 10.0 90 ± 10% 30 2.52 11.0 11.0 85 ± 10% 30 0.796 6.0 12.0 80 ELECTRICAL SPECIFICATIONS Inductance Range: .01µH to 100µH. Inductance Tolerance: ± 20% for 0.01µH to 0.82µH. ± 10% for 1.0µH to 100µH standard. 2%, 3% and 5% (also 1% on some values) tolerances available. Temperature Range: - 55°C to + 125°C. Coilform Material: Non-magnetic for 0.01µH to 0.10µH. Powdered Iron for 0.12µH to 100µH. TEST EQUIPMENT • H/P 4342A Q meter with Vishay Dale test fixture or equivalent. • H/P 4191A RF Impedance Analyzer (for SRF measurements). • Wheatstone Bridge. DIMENSIONS in inches [millimeters] 0.087 ± 0.008 [2.21 ± 0.203] 0.030 [0.762] Typ. 0.006 [0.152] Ref. Typ. 0.126 ± 0.008 [3.20 ± 0.203] 0.028 ± 0.004 [0.711 ± 0.102] Typ. 0.040 [1.02] 0.098 ± 0.008 [2.49 ± 0.203] 0.118 [3.0] 0.138 [3.5] 0.073 [1.85] Ref. 0.118 Guidelines for 0.020* [3.0] [0.508] Parallel Component Printed Circuit 0.039 0.039 Mounting Pads on [1.0] [1.0] ISC-1210 0.070 [1.8] Chip Inductors *Recommended minimum spacing between components. PART MARKING — Dale — Inductance value — Date code DESCRIPTION 10µH INDUCTANCE VALUE ISC-1210 MODEL ± 10% INDUCTANCE TOLERANCE SAP PART NUMBERING GUIDELINES (INTERNAL) I S C 1 2 PRODUCT FAMILY 1 SIZE 0 S Y 1 PACKAGE CODE 0 0 INDUCTANCE VALUE K TOL. See the end of this data book for conversion tables www.vishay.com 58 For technical questions, contact [email protected] Document Number 34060 Revision 28-Aug-02