IMC-0402 Vishay Dale High Frequency, Surface Mount, Laser Spiral, Coated Inductors FEATURES • • • • • • Very small in size High self-resonant frequency values High Q values relative to size at higher frequencies Coated coil provides protection and moisture resistance Compatible with vapor phase and infrared reflow soldering Tape and reel packaging for automatic handling, 10,000/reel, EIA-481 • L and Q value not affected by mounting orientation ELECTRICAL SPECIFICATIONS TEST EQUIPMENT Inductance Range: 1.0nH to 100nH Inductance and Tolerance: ± 0.3nH for 1.0 - 5.6nH ± 5% for 6.8nH to 100nH Operating Temperature: - 40°C to + 100°C Core Material: Ceramic • Inductance and Q measured on HP4291B • SRF measured on HP8753E • DCR measured on HP4338B STANDARD ELECTRICAL SPECIFICATIONS TEST FREQUENCY INDUCTANCE L Q (nH) TOLERANCE (MHz) TYPICAL 1.0 ± 0.3nH, 0.2nH 100 21 1.2 ± 0.3nH, 0.2nH 100 21 1.5 ± 0.3nH, 0.2nH 100 21 1.8 ± 0.3nH, 0.2nH 100 21 2.2 ± 0.3nH, 0.2nH 100 21 2.7 ± 0.3nH, 0.2nH 100 21 3.3 ± 0.3nH, 0.2nH 100 21 3.9 ± 0.3nH, 0.2nH 100 20 4.7 ± 0.3nH, 0.2nH 100 20 5.6 ± 0.3nH, 0.2nH 100 20 6.8 ± 5% 100 19 8.2 ± 5% 100 19 10 ± 5%, 2% 100 19 12 ± 5%, 2% 100 19 15 ± 5%, 2% 100 19 18 ± 5%, 2% 100 19 22 ± 5%, 2% 100 19 27 ± 5%, 2% 100 19 33 ± 5%, 2% 100 18 39 ± 5%, 2% 100 18 47 ± 5%, 2% 100 17 56 ± 5%, 2% 100 17 68 ± 5%, 2% 100 15 82 ± 5%, 2% 100 15 100 ± 5%, 2% 100 14 *Value obtained when current flows and temperature has risen 15°C TEST FREQUENCY Q (MHz) 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 SELF-RESONANT FREQUENCY MINIMUM (MHz) 6000 6000 6000 6000 6000 5500 5500 5200 4800 4600 4000 3500 2800 2800 2500 2200 2000 1800 1800 1800 1800 1500 1500 1400 1200 DCR MAXIMUM (Ohms) 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.15 0.17 0.19 0.30 0.35 0.41 0.45 0.60 0.70 0.80 1.20 1.40 1.70 2.10 2.50 4.00 4.50 5.50 RATED DC* CURRENT (mA) 400 400 400 400 400 400 400 360 360 340 320 320 320 320 240 240 200 200 170 150 140 130 120 110 90 DIMENSIONS in inches [millimeters] Solder Pad Layout 0.008 [0.2] 0.020 ± 0.004 [0.5 ± 0.1] 0.039 ± 0.004 [1.0 ± 0.1] 0.02 [0.50] 0.020 [0.50] 0.020 ± 0.004 [0.5 ± 0.1] 0.063 [1.60] 90/10 Sn/Pb Termination DESCRIPTION IMC-0402 MODEL ± 5% INDUCTANCE TOLERANCE 10nH INDUCTANCE VALUE SAP PART NUMBERING GUIDELINES (INTERNAL) I M C 0 4 PRODUCT FAMILY 0 SIZE 2 R K 1 PACKAGE CODE 0 N INDUCTANCE VALUE J TOL. See the end of this data book for conversion tables www.vishay.com 48 For technical questions, contact [email protected] Document Number 34038 Revision 16-May-03