FLARE LENS FEATURES / BENEFITS Use with all Lumileds Luxeon® LEDs PMMA acrylic for maximum optical performance Mounts directly on PCB Low profile < 1.0 inch ±10º vertical distribution ±80º horizontal distribution APPLICATION The flare lens has been designed for use with all Lumileds’ Luxeon LEDs. These lenses are assembled directly on the PCB without an additional holder. Well suited where a 360º illumination pattern is needed. OPERATING CONDITIONS 105º C max temperature MATERIALS/FINISH Lenses are optical grade PMMA acrylic MECHANICAL DIMENSIONS ORDERING INFORMATION Dialight P/N Reference P/N OPFL OP-FL Description Degree* Flare Lens 10º X 80º *All angles refer to half divergence Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMFL_A FLARE LENS PHOTOMETRIC DATA Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMFL_A