CREE® ADHESIVE-BACKED LENS FEATURES / BENEFITS p For CREE XR & XR-E series LEDs p Available in spot, diffuser, wide, and oval lenses p Integral self-adhesive pad p Snap-on sub-lens p Greater than 85% efficiency MATERIALS/FINISH OPERATING CONDITIONS p 85º C max acrylic temperature p 105º C max adhesive temperature p Optical grade PMMA acrylic ORDERING INFORMATION BASE LENSES Dialight P/N Reference P/N Description Degree* OPTX1006 OPTX-1-006 OPTX Series Spot Base Module For CREE 6º SUB-LENSES OPAA1DF OPAA-1-DF Diffuser Sub-Lens 8º OPAA1WSL OPAA-1-WSL Wide Sub-Lens 18º OPAA1OSL OPAA-1-OSL Oval Sub-Lens 8º X 25º *All angles refer to half divergence www.dialight.com CREE® ADHESIVE-BACKED LENS MECHANICAL DIMENSIONS Adhesive tape 0.4mm Base Spot Adhesive tape 0.4mm Base Spot + Wide Sub-Lens Adhesive tape 0.4mm Base Spot + Oval Sub-Lens Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDEXLUMADBCREE.pdf MDEXLUMADBCREE_D www.dialight.com