DATA SHEET MMBD6100W SURFACE MOUNT SWITCHING DIODES 200mWatts POWER 80 Volts VOLTAGE SOT-323 Unit: inch (mm) .087(2.2) .070(1.8) .054(1.35) .045(1.15) MECHANICAL DATA .006(.15) .002(.05) .056(1.40) .047(1.20) Case: SOT-323 plastic Terminals : Solderable per MIL-STD-750,Method 2026 Approx weight : 0.008 gram Marking : T4 .087(2.2) .078(2.0) Dual, common cathode configuration Very fast reverse recovery ( Trr< 2.0ns typical ) Low capacitance ( < 2.5pF @ 0V) Surface mount package ideally suited for anuomatic insetion In compliance with EU RoHS 2002/95/EC directives .004(.10)MAX. .016(.40) .008(.20) .044(1.1) .035(0.9) • • • • • .004(.10)MIN. FEATURES ABSOLUTE RATINGS PARAMETER SYMBOL VALUE UNITS VR 80 V VRRM 80 V IF 0.2 A IFSM 4.0 A SYMBOL VALUE UNITS PTOT 200 mW RΘJA 625 Junction Temperature TJ -55 to 150 O Storage Temperature TSTG -55 to 150 O Maximum Reverse Voltage Peak Reverse Voltage Continuous Forward Current Non-repetitive Peak Forward Surge Current at t=1.0 µs THERMAL CHARACTERISTICS PARAMETER Power Dissipation (1 ) Thermal Resistance, Junction to Ambient (1 ) O C/W C C COMMON CATHODE NOTE: 1. FR-4 Board=70 x 60 x 1mm. REV.0.1-FEB.10.2009 PAGE . 1 ELECTRICAL CHARACTERISTICS PARAMETER Reverse Breakdown Voltage O (T =25 C , unless otherwise noted) J SYMBOL VBR TEST CONDITIONS MIN. TYP. MAX. UNITS IR=100µA 80 - - V − - 100 nA 0.55 0.85 - 0.7 1.1 V - - 2.5 pF - - 4.0 ns Reverse Current IR VR=50V Forward Voltage VF IF=1mA IF=100mA Total Capacitance CT Reverse Recovery Time (Figure 1) trr REV.0.1-FEB.10.2009 VR=0V, f =1MHz IF=IR=10mA, RL=100 Ω PAGE . 2 ELECTRICAL CHARACTERISTIC CURVES (each diode) 10.000 100 TJ = 150 °C 1.000 Forward Current, IF (mA) Reverse Leakage Current, I R (uA) TJ = 150 °C TJ = 75 °C 0.100 0.010 10 TJ = 25 °C TJ = 75 °C 1 TJ = 25 °C TJ = -25 °C 0.1 0.001 0 20 40 60 0.0 80 0.2 0.4 0.6 0.8 1.0 1.2 Forward Voltage, VF (V) Reverse Voltage, VR (V) Fig. 2. Reverse Current vs. Reverse Voltage Fig. 3. Forward Current vs. Forward Voltage 2.5 Capacitance (pF) 2 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 Reverse Voltage, VR (V) Fig. 4. Capacitance vs. Reverse Voltage REV.0.1-FEB.10.2009 PAGE . 3 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. REV.0.1-FEB.10.2009 PAGE . 4