DATA SHEET MMBD6100 SURFACE MOUNT SWITCHING DIODES 225mWatts POWER 80 Volts VOLTAGE FEATURES • • • • • Dual, common cathode configuration Very fast reverse recovery ( Trr< 2.0ns typical ) Low capacitance ( < 2.5pF @ 0V) Surface mount package ideally suited for anuomatic insetion In compliance with EU RoHS 2002/95/EC directives MECHANICAL DATA Case: SOT-23 plastic Terminals : Solderable per MIL-STD-750,Method 2026 Approx weight : 0.008 gram Marking : T4 ABSOLUTE RATINGS PARAMETER Maximum Reverse Voltage Peak Reverse Voltage Continuous Forward Current Non-repetitive Peak Forward Surge Current at t=1.0 µs SYMBOL VALUE UNITS VR 80 V VRRM 80 V IF 0.2 A IFSM 4.0 A SYMBOL VALUE UNITS PTOT 225 THERMAL CHARACTERISTICS PARAMETER Power Dissipation (1 ) mW RΘJA 556 Junction Temperature TJ -50 to 150 O C Storage Temperature TSTG -50 to 150 O C Thermal Resistance, Junction to Ambient (1 ) O C/W COMMON CATHODE NOTE: 1. FR-4 Board=70 x 60 x 1mm. REV.0.1-FEB.11.2009 PAGE . 1 ELECTRICAL CHARACTERISTICS PARAMETER Reverse Breakdown Voltage O (T =25 C , unless otherwise noted) J SYMBOL VBR TEST CONDITIONS IR=100µA MIN. TYP. MAX. UNITS 80 - - V Reverse Current IR VR=50V - - 100 nA Forward Voltage VF IF=1mA IF=100mA - - 0.7 1.1 V Total Capacitance CT VR=0V, f =1MHz - - 2.5 pF Reverse Recovery Time (Figure 1) trr IF=IR=10mA, RL=100 Ω - - 4.0 ns REV.0.1-FEB.11.2009 PAGE . 2 ELECTRICAL CHARACTERISTIC CURVES (each diode) 100 10.000 TJ = 150 °C Forward Current, IF (mA) Reverse Leakage Current, IR (uA) TJ = 150 °C 1.000 TJ = 75 °C 0.100 0.010 10 TJ = 25 °C TJ = 75 °C 1 TJ = 25 °C TJ = -25 °C 0.1 0.001 0 20 40 60 80 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Forward Voltage, VF (V) Reverse Voltage, VR (V) Fig. 2. Reverse Current vs. Reverse Voltage ig. 3. Forward Current vs. Forward Voltage 2.5 Capacitance (pF) 2 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 Reverse Voltage, VR (V) Fig. 4. Capacitance vs. Reverse Voltage REV.0.1-FEB.11.2009 PAGE . 3 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. REV.0.1-FEB.11.2009 PAGE . 5