HMC226 / 226E v03.0505 GaAs MMIC +3V SOT26 TRANSMIT / RECEIVE SWITCH, DC - 2 GHz D E U N I T N O T C C S U I D D O PR Typical Applications Features The HMC226 / HMC226E is ideal for: Low Insertion Loss: 0.6 dB • 900 MHz ISM/Cellular Ultra Small Package: SOT26 • 1900 MHz PCS High Input P1dB: +35 to +38 dBm ns g i s De High Input IP3: +55 to +61 dBm Positive Control: 0/+3V to 0/+8V ew N r fo d e d enGeneral Description m m o c The HMC226 & HMC226E are low-cost SPDT switRe t o ches in 6-lead SOT26 packages for use in transmitN Included in the HMC-DK005 Designer’s Kit Functional Diagram receive applications which require very low distortion at high signal power levels. The device can control signals from DC to 2.0 GHz and is especially suited for 450 MHz, 900 MHz, and 1.8 - 2 GHz applications with 0.5 to 0.8 dB loss. The design provides exceptional P1dB and intermodulation performance; a +35 dBm 1dB compression point and +55 dBm third order intercept at +3 volt bias. RF1 and RF2 are reflective opens when “Off”. On-chip circuitry allows single positive supply operation at very low DC current with control inputs compatible with CMOS and most TTL logic families. SWITCHES - SPDT T/R - SMT 11 Electrical Specifi cations, TA = +25° C, Vctl = 0/+3 Vdc, 50 Ohm System Parameter Frequency Typ. Max. Units 0.5 0.6 0.8 0.8 0.9 1.2 dB dB dB Insertion Loss DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz Isolation DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz 23 17 12 26 20 15 dB dB dB Return Loss DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz 23 21 14 27 25 18 dB dB dB 34 31 38 35 dBm dBm 61 55 dBm dBm 70 140 ns ns Input Power for 1 dB Compression 0/5V Control 0/3V Control 0.3 - 2.0 GHz Input Third Order Intercept (Two-Tone Input Power = +26 dBm Each Tone) 0/5V Control 0/3V Control 0.3 - 2.0 GHz Switching Characteristics DC - 2.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 11 - 2 Min. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC226 / 226E v03.0505 GaAs MMIC +3V SOT26 TRANSMIT / RECEIVE SWITCH, DC - 2 GHz D E U N I T N O T C C S U I D D O PR Insertion Loss vs Temperature 0 0 -0.5 -10 -1 -1.5 ISOLATION (dB) -30 ew N r fo d e end m com e R Not +25 C +85 C -40 C -2 -20 -40 -2.5 -3 -50 0 0.5 1 1.5 2 2.5 0 0.5 FREQUENCY (GHz) 1 1.5 2 2.5 FREQUENCY (GHz) Input 0.1 and 1.0 dB Compression vs. Control Voltage @ 900 MHz Return Loss 11 40 INPUT COMPRESSION (dBm) 0 -5 RETURN LOSS (dB) ns g i s De RFC RF1,RF2 -10 -15 -20 -25 -30 -35 35 30 0.1 dB Compression 1 dB Compression 25 20 0 0.5 1 1.5 2 2.5 2 3 FREQUENCY (GHz) 6 7 8 Truth Table *Control Input Voltage Tolerances are ± 0.2 Vdc. Control Input Input Power for 0.1 dB Compression Input Power for 1.0 dB Compression (Vdc) (dBm) (dBm) +3 30 +5 33 +7 35 38.5 Control Current Signal Path State A (Vdc) B (Vdc) Ia (uA) RF to RF1 RF to RF2 35 0 +3 -5 5 ON OFF 38 +3 0 5 -5 OFF ON 0 +5 -10 10 ON OFF Caution: Do not operate continuously at power levels >1 dB compression and do not “hot switch” power levels greater than +23dBm (VCTL = +3Vdc). Absolute Maximum Ratings 0.05 GHz 0.5 - 2 GHz 5 Control Voltage (Vdc) Compression vs. Control Voltage @ 900 MHz Max. Input Power (VCTL = 0/+3V) 4 +27 dBm +36 dBm Control Voltage Range (A & B) -0.2 to +12 Vdc Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Control Input* Ib (uA) +5 0 10 -10 OFF ON 0 +8 -45 45 ON OFF +8 0 45 -45 OFF ON SWITCHES - SPDT T/R - SMT INSERTION LOSS (dB) Isolation DC Blocks are required at ports RFC, RF1 and RF2. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 3 HMC226 / 226E v03.0505 GaAs MMIC +3V SOT26 TRANSMIT / RECEIVE SWITCH, DC - 2 GHz D E U N I T N O T C C S U I D D O PR Outline Drawing ew N r fo d e end m com e R Not ns g i s De NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 11 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. SWITCHES - SPDT T/R - SMT 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC226 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC226E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H226 XXXX [2] 226E XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Typical Application Circuit Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 8 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with V set to +10V. The switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. 11 - 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC226 / 226E v03.0505 GaAs MMIC +3V SOT26 TRANSMIT / RECEIVE SWITCH, DC - 2 GHz D E U N I T N O T C C S U I D D O PR Evaluation Circuit Board ew N r fo d e end m com e R Not ns g i s De List of Materials for Evaluation PBC 101675 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J7 DC Pin C1 - C3 330 pF capacitor, 0402 Pkg. U1 HMC226 / HMC226E T/R Switch PCB [2] 101659 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com SWITCHES - SPDT T/R - SMT 11 11 - 5