SPICE MODEL: PDS5100H PDS5100H 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER PowerDI ä5 NEW PRODUCT Features · Guard Ring Die Construction for Transient Protection · · · · Low Forward Voltage Drop · · · High Forward Surge Current Capability · · · · · A2 b2 Dim Min Max L1 High Junction Temperature Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications E "Green" Molding Compound (No Br, Sb) LEFT PIN RIGHT PIN e BOTTOMSIDE b1 HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Case: PowerDIä5 E1 L1 Lead Free Finish, RoHS Compliant (Note 1) Mechanical Data · · PowerDIä5 A D Very Low Leakage Current A2 b1 A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 3.05 NOM D2 D D2 b2 6.40 E 6.60 1.84 NOM e L 5.30 E1 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 E2 W Moisture sensitivity: Level 1 per J-STD-020C Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 L1 e b1 b1 5.45 3.55 NOM E2 E L 0.75 0.95 L1 0.50 0.65 W 1.20 1.50 All Dimensions in mm Polarity: See Diagram Marking: See Page 3 Weight: 0.077 grams (approx.) Maximum Ratings @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Operating and Storage Temperature Range Thermal Characteristics Symbol Value Unit VRRM VRWM VR 100 V VR(RMS) 71 V IO 5 A IFSM 250 A Tj, TSTG -65 to +150 °C @ TA = 25°C unless otherwise specified Symbol Typ Max Unit Thermal Resistance Junction to Soldering Point Characteristic RqJS ¾ 2.0 °C/W Thermal Resistance Junction to Ambient Air (Note 2) RqJA 95 110 °C/W Notes: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. 2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 3 www.diodes.com PDS5100H ã Diodes Incorporated @ TA = 25°C unless otherwise specified Min Typ Max V(BR)R 100 ¾ ¾ V IR = 10mA Forward Voltage VF ¾ ¾ ¾ ¾ 0.67 0.55 0.74 0.63 0.71 0.58 0.80 0.66 V IF = 5A, TS = 25°C IF = 5A, TS = 125°C IF = 10A, TS = 25°C IF = 10A, TS = 125°C Reverse Leakage Current (Note 3) IR ¾ ¾ 0.5 0.5 10 4.5 mA mA Characteristic Symbol Reverse Breakdown Voltage (Note 3) Unit Test Condition TS = 25°C, VR = 100V TS = 125°C, VR = 100V 3. Short duration test pulse used to minimize self-heating effect. IR, INSTANTANEOUS REVERSE CURRENT (nA) IF, INSTANTANEOUS FORWARD CURRENT (mA) Notes: 100000 10000 1000 Tj = 150°C 100 10 Tj = 125°C 1 Tj = 85°C Tj = 25°C 0.1 Tj = -65°C 0.01 1000 Tj = +25°C 100 10 Tj = -65°C 1 0.1 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 20 0 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 1 Typical Forward Characteristics 60 40 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 10 800 f = 1MHz 700 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (mA) NEW PRODUCT Electrical Characteristics Tj = +150°C 1 Tj = +125°C 0.1 Tj = +85°C 0.01 600 500 400 300 200 100 0 0.001 0 20 40 60 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 3 www.diodes.com 0 5 10 15 20 25 30 35 40 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage PDS5100H 7.5 8 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) IF, DC FORWARD CURRENT (A) 6.0 4.5 Note 4 3.0 Note 2 1.5 0 0 25 50 75 100 125 Tj = 150°C 7 IPK = 1 (DC) IAV 6 5 4 3 2 1 0 150 0 TA, AMBIENT TEMPERATURE (°C) Fig. 5 DC Forward Current Derating 1 2 3 4 5 6 7 8 9 10 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation 200 TA, DERATED AMBIENT TEMPERATURE (°C) NEW PRODUCT Tj = 150°C 180 Note 2 160 140 120 100 80 60 40 20 0 0 25 50 75 100 VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating Ordering Information Notes: 2. 3. 4. 5. (Note 5) Device Packaging Shipping PDS5100H-13 PowerDIä5 5000/Tape & Reel FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Short duration test pulse used to minimize self-heating effect. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information S5100H YYWWK S5100H = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year ex: 04 for 2004 WW = Week code 01 to 52 K = Factory Designator DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 3 www.diodes.com PDS5100H