MA-COM MA4EXP950M

MA4EXP950M-1277T
Silicon Double Balanced HMIC Mixer
850 – 1050 MHz
Rev. V2
Features
•
•
•
•
•
•
MLP 3mm Package - Circuit Side View
+ 28 dBm Typical Input IP3
62dB Typical L-R Isolation
8. 2dB Typical Conversion Loss
+ 13 to + 17 dBm LO Drive
NO External Matching Required
Low Cost Miniature Plastic MLP Package
Description
PIN 1
M/A-COM's MA4EXP950M-1277 is a silicon monolithic
850-1050 MHz , Medium barrier, double balanced mixer in
a low cost, miniature surface mount FQFP-N 3mm Square,
16 lead plastic package. The die uses M/A-COM’s unique
HMIC silicon/glass process to realize low loss passive
elements while retaining the advantages of medium barrier
silicon schottky diodes to produce a compact device.
Applications
These mixers are well suited for GSM and CDMA Cellular
basestation applications where small size and high
performance are required. Typical applications include
frequency conversion, modulation, and demodulation in
wireless receivers and transmitters.
PIN 16
PIN CONFIGURATION (Center Area is Ground)
PIN
Function
PIN
Function
1
2
3
4
5
6
7
8
N/C
N/C
LO
N/C
N/C
N/C
N/C
N/C
9
10
11
12
13
14
15
16
N/C
RF
N/C
N/C
N/C
IF
N/C
N/C
Ordering Information
Model No.
Package
MA4EXP950M-1277T
Tape and Reel
Electrical Specifications @ +25°C
Parameter
Conversion Loss
L - R Isolation
L - I Isolation
R - I Isolation
LO VSWR
RF VSWR
IF VSWR
Input IP3
Input 1 dB
Compression
IF 1 dB Bandwidth
Frequency Range
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
DC - 400 MHz
900 MHz
850-1050 MHz
900 MHz
850-1050 MHz
DC - 400 MHz
Test Conditions
LO Drive = +15 dBm
RF = -10 dBm, IF = 60 MHz
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
IF Level = - 10 dBm
LO Drive = +15 dBm
RF = - 10 dBm, IF = 60 MHz
LO Drive = +15 dBm
IF = 60 MHz
LO =900 MHz @ +15dBm
Units
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBm
MHz
Min.
-
Typ.
8.0
8.2
65
62
54
50
30
30
1.8:1
1.7:1
1.2:1
1.5:1
1.5:1
Max.
9.0
9.1
-
21.5
21.0
0
28.0
28.0
8.0
8.1
-
400
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4EXP950M-1277T
Silicon Double Balanced HMIC Mixer
850 – 1050 MHz
Rev. V2
Typical Performance Curves ( LO Drive= +13, +15, +17dbm, RF= -10dBm, IF= 60MHz)
Conversion Loss
-7
-7.5
PLO = 15dBm
PLO = 17dBm
LOSS (DB)
-8
-8.5
PLO = 13dBm
-9
-9.5
-10
850
875
900
925
950
975
1000
1025
1050
FREQUENCY (MHz)
Input IP3 and P1dB
35
PLO = 17dBm
PLO = 15dBm
30
25
IP3 (dBm)
PLO = 13dBm
20
15
1db Compression
10
5
0
850
875
900
925
950
975
1000
1025
1050
FREQUENCY (MHz)
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4EXP950M-1277T
Silicon Double Balanced HMIC Mixer
850 – 1050 MHz
Rev. V2
Isolation ( LO Drive= +15dbm, RF= -10dBm)
0
-10
ISOLATION(dB)
-20
R-I
-30
-40
L-I
-50
-60
L-R
-70
-80
850
875
900
925
950
975
1000
1025
1050
1025
1050
FREQUENCY (MHz)
VSWR ( LO Drive= +15dbm, RF= -10dBm, IF=-10dBm)
2.20
2.00
L Port
VSWR
1.80
1.60
I Port
1.40
R Port
1.20
1.00
3
850
875
900
925
950
975
1000
50
100
150
200
250
300
350
400
FREQUENCY (MHz)
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4EXP950M-1277T
Silicon Double Balanced HMIC Mixer
850 – 1050 MHz
Rev. V2
Mixer Schematic
IF
RF
LO
Absolute Maximum Ratings1
Parameter
1.
Maximum Ratings
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
Incident LO Power
+20 dBm C.W.
Incident RF Power
+20 dBm C.W.
Exceeding these limits may cause permanent damage.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4EXP950M-1277T
Silicon Double Balanced HMIC Mixer
850 – 1050 MHz
Rev. V2
MA4EXP190H-1277 Outline – 3mm FQFP-N 16 Lead Saw Singulated
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.