MA4EX190H1-1225T Silicon Double Balanced HMIC Mixer 1700 - 2300 MHz Features • • • • • • • • • Low Cost Miniature Plastic Package 6.6 dB Typical Conversion Loss at 1900 MHz 6.7 dB Typical Conversion Loss at 2200 MHz +13 to +17 dBm LO Drive HMIC™ Process Silicon High Barrier Schottky Diodes DC - 500 MHz IF Bandwidth RoHS* Compliant with 260 °C. Reflow Capability 100% MATTE Tin Plating M/A-COM Products Rev. V3 SOT-25 Package Outline (Topview) 3 2 1 Description and Applications M/A-COM’s MA4EX190H1-1225T is a silicon monolithic 1700-2300 MHz double balanced mixer in a low cost miniature surface mount SOT-25 package. The die uses M/A-COM’s unique HMICTM silicon/ glass process to achieve low loss passive elements while retaining the advantages of low barrier silicon Schottky diodes. These mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation for receivers and transmitters in both portable cellular and base station applications. 5 PIN Configuration PIN Function PIN Function 1 RF 4 GND 2 GND 5 IF 3 LO Schematic Ordering Information Standard Part Number 4 Package IF RF MA4EX190H1-1225T Tape and Reel MAMX-000190-000SMB Sample Test Board LO Absolute Maximum Ratings1 Parameter Maximum Ratings Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C Incident LO Power +20 dBm Incident RF Power +20 dBm Solder Temperature +260°C 1. Exceeding these limits may cause permanent damage. *Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4EX190H1-1225T Silicon Double Balanced HMIC Mixer 1700 - 2300 MHz M/A-COM Products Rev. V3 Electrical Specifications @ +25 °C Parameter Frequency Range Test Conditions Units Conversion Loss 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF = -10 dBm, IF = 60 MHz L - R Isolation 1900 MHz 1700-2300 MHz L - I Isolation Typ. Max. dB dB 6.6 6.7 7.0 8.0 LO Drive = +15 dBm RF Level = -10 dBm dB dB 30.0 30.0 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm dB dB 28.0 28.0 R - I Isolation 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm dB dB 23.0 20.0 RF VSWR 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm 1.10:1 1.20:1 IF VSWR DC - 500 MHz LO Drive = +15 dBm RF Level = -10 dBm 1.40:1 Input IP3 1900 MHz 1850-2300 MHz LO Drive = +15 dBm IF = 60 MHz dBm dBm Input 1 dB Compression 1900 MHz 1700-2300 MHz LO Drive = +17 dBm IF = 60 MHz dBm dBm IF 1 dB Bandwidth Min. 23 23 MHz - 26.0 26.0 0 10.5 10.5 - 500 - Typical Performance Curves (LO Drive = +15 dBm, RF = -10 dBm, IF = 60 MHz) Conversion Loss Isolation -5 0 -5.5 -5 -6 LOSS (DB) P LO = 17dB m ISOLATION(dB) -10 P LO = 15dB m -6.5 -7 P LO = 13dB m -15 R-I -20 L-I -7.5 -25 -8 -30 L-R -8.5 -35 1650 1720 1790 1860 1930 2000 2070 2140 2210 2280 2350 1650 1750 1850 FR EQ U EN C Y (M H z) 1950 2050 2150 2250 2350 FREQUENCY (M Hz) Input IP3 & 1dB Compression Point VSWR 2.60 35 2.40 30 PLO = 17dBm 2.20 25 R Port IP3 (dBm) VSWR 2.00 1.80 1.60 I Port 1.40 PLO = 15dBm 20 15 1db Compression 10 1.20 5 1.00 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 50 2 100 150 200 250 300 350 400 450 FREQUENCY (MHz) 500 0 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 FREQUENCY (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4EX190H1-1225T Silicon Double Balanced HMIC Mixer 1700 - 2300 MHz Case Style - SOT-25 M/A-COM Products Rev. V3 SOT-25 Dimensions Inches Dim Millimeters Min. Max. Min. Max. A B .106 .100 .122 .118 2.70 2.54 3.10 3.00 C — .051 — 1.30 D .063 REF. 1.60 REF. E .032 .043 .80 1.10 F .014 .020 .35 .50 G .003 — .08 — H .000 .006 .00 .15 J .018 REF. .45 REF. 2. Leads Coplanarity should be 0.003 (0.08) max. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed. changes to the product(s) or information contained herein without notice.