FRONTIER FR30-02

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
3A FAST RECOVERY PLASTIC RECTIFIER
FR30-005 THRU FR30-10
1.0(25.4)
MIN
FEATURES
z FAST RECOVERY TIMES
z UL 94V-0 FLAME RETARDANT EPOXY MOLDING COMPOUND
z DIFFUSED JUNCTION
z LOW COST
z HIGH SURGE CURRENT CAPABILITY
.052(1.3)
.048(1.2)
.375(9.5)
.335(8.5)
.220(5.6)
.197(5.0)
1.0(25.4)
MIN
MECHANICAL DATA
z CASE: TRANSFER MOLDED, DO201AD, DIMENSIONS
IN INCHES AND (MILLIMETERS)
z LEADS: SOLDERABLE PER MIL-STD-202,METHOD 208
z POLARITY: CATHODE INDICATED BY COLOR BAND
z WEIGHT: 1.2 GRAMS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
SYMBOL FR30-005 FR30-01 FR30-02 FR30-04 FR30-06 FR30-08 FR30-10 UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
MAXIMUM RMS VOLTAGE
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
VRRM
VRMS
VDC
TYPICAL THERMAL RESISTANCE (NOTE 2)
STORAGE TEMPERATURE RANGE
OPERATING TEMPERATURE RANGE
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
IO
3.0
A
IFSM
150
A
CJ
28
PF
Rθja
20
℃/W
TSTG
-55 TO + 150
℃
TOP
-55 TO + 125
℃
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL FR30-005 FR30-01 FR30-02 FR30-04 FR30-06 FR30-08 FR30-10 UNITS
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
1.3
V
MAXIMUM REVERSE CURRENT AT 25℃
IR
5
μA
MAXIMUM REVERSE CURRENT AT 100℃
IR
50
μA
MAXIMUM REVERSE RECOVERY TIME (NOTE 3)
TRR
150
250
NOTE:
1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 63.5x63.5x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A
FR30-005 THRU FR30-10
Page: 1
500
nS
RATINGS AND CHARACTERISTIC CURVE FR30-005 THRU FR30-10
FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTIC
Trr
10Ω
NO INDUCTIVE
50Ω
NO INDUCTIVE
+0.5A
(-)
D.U.T.
0
PULSE
GENERATOR
( NOTE 2 )
(+)
25 Vdc
(approx)
1Ω
NON
INDUCTIVE
(-)
OSCILLOSCOPE
( NOTE 1 )
-0.25A
(+)
-1.0A
1cm
NOTE: 1. RISE TIME=7ns MAX. INPUT
IMPEDANCE=1 MOhms 22PF
2. RISE TIME =10ns MAX. SOURCE
IMPEDANCE=50 OHMS
SET TIME BASE
FOR 10/20 ns/cm
SINGLE PHASE HALF
WAVE 60Hz
RESISTIVE OR
INDUCTIVE LOAD
2.0
1.0
0
0
20 40
PEAK FORWARD SURGE CURRENT
AMPERES
3.0
200
8.3ms Single Half Sine-Wave
(JEDEC Method)
100
50
10
1
60 80 100 120 140 160 180 200
10
100
O
TA-AMBIENT TEMPERATURE ( C)
NUMBER OF CYCLES AT 60HZ
FIG. 5-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
10
Tj=100oC
1.0
Tj=50oC
0.1
Tj=25oC
0.01
0
20
40
60 80 100 120 140
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FR30-005 THRU FR30-10
INSTANTANEOUS FORWARD CURRENT
AMPERES
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
Io-AVERAGE RECTIFIED
CURRENT (A)
Fig. 2-MAXIMUM CURRENT DERATING CURVE
Fig. 3-MAXIMUM FORWARD SURGE
NUMBER OF CYCLES
100
10
1.0
0.1
Tj=25oC
PULSE WIDTH =300us
1% DUTY CYCLE
0.01
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
Page: 2