Two-Way Power Divider 10 - 1000 MHz T-1000 V2.00 C-7 Features ● ● ● C Broadband Frequency Range Isolation – 25 dB Min Insertion Loss – 0.8 dB Max D CONNECTOR 3 PLACES B 0.750 ±0.020 (19.1 ±0.5) Guaranteed Specifications* 0.672 (17.1) 0.375 ±0.020 (9.5 ±0.5) 1.344 (34.1) C'BORE 0.12 DIA x 0.14 DP, 4-40 UNC-3B x 0.20 DP 1.344 (34.1) 0.672 (17.1) 1.000 DIA (25.4) 45˚ Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 2.5 OUNCES 7 GRAMS Operating Characteristics LOSS (dB) 1.50 MIL-STD-202 screening available. *All specifications apply with 50 Ohm source and load impedance. Ordering Information BNC TNC N SMA 0° 4.25 1.00 4.00 0.75 PORTS B-C, B-D 3.50 0.25 3.25 10 3.00 20 30 5070100 500 1000 1500 ISOLATION 45 40 PORTS C-D 35 30 25 20 5 0° 10 20 30 5070100 500 1000 1500 VSWR A B 3.75 0.50 50 C 4.50 1.25 05 Package Connectorized Connectorized Connectorized Connectorized ISOLATION (dB) Model No. T-1000 T-1000 T-1000 T-1000 INSERTION LOSS 1.7 1.6 180° 0° Zo 1.5 VSWR Port "A" is internally terminated D 1.4 1.3 ALL PORTS 1.2 Figure 1. 2 Way, In-Phase (0°) Power Divider/Summer, or ISO-T 1.1 1.0 5 10 20 30 5070100 500 1000 1500 FREQUENCY MHz M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 6-49 TOTAL TRANSMISSION LOSS (dB) Typical Performance