STEVAL-CCA007V1 Demonstration board for the TS2012 filter-free stereo 2x2.8W class D audio power amplifier Data Brief Features ■ Operating range from VCC = 2.5 V to 5.5 V ■ Standby mode active low ■ Output power per channel: 1.3 5 W at 5 V or 0.68 W at 3.6 V into 8 Ω with 1% THD+N max ■ Output power per channel: 2.2 W at 5 V into 4 Ω with 1% THD+N max ■ Four gain select settings: 6, 12, 18, 24 dB ■ Low current consumption ■ PSRR: 70 dB typ at 217 Hz with 6 dB gain ■ Fast start-up phase: 1 ms ■ Thermal shutdown protection ■ QFN20 4x4 mm lead-free package STEVAL-CCA007V1 Description This demonstration board is designed for evaluation of the TS2012, a fully differential class D stereo power amplifier. The TS2012 device is housed in a QFN package and mounted on a twolayer PCB with a copper area acting as a heatsink. Easily accessible connectors on the board allow changing or driving gain select pins (G0 and G1) and standby control pins. It is also possible to change the input configuration of the TS2012. May 2008 Rev 1 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 4 Schematic 1 STEVAL-CCA007V1 Schematic Figure 1. Schematic diagram 9&& 3 *1' * 9&& 3 9&& 3 & X) *1' *1' *1' 9&& * 8 76,47 3 /,1 *DLQ & /LQ Q) *1' + 3:0 6HOHFW /,1 /287 /287 5,1 3 5,1 & 67%</ 3:0 6HOHFW %ULGJH 5287 5287 3 5RXW Q) 6WDQGE\ &RQWURO 9&& 3 *1' 6WDQGE\5 9&& 3 *1' 3*1' 67%<5 3 *1' Q) + 3 *DLQ 3*1' *1' 2VFLOODWRU $*1' 5LQ 3 /RXW & 2/4 %ULGJH * * 3 39&& 39&& Q) 3 *1' $9&& /LQ *1' 9&& 9&& & 5LQ *1' & Q) 3 3 & X) 6WDQGE\/ *1' *1'*1' STEVAL-CCA007V1 2 Revision history Revision history Table 1. Document revision history Date Revision 23-May-2008 1 Changes Initial release. 3/4 STEVAL-CCA007V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4