DESCRIPTION MECHANICAL DIMENSION 3.6+/-0.2mm FGF4007 _ + 3.0+/-0.2mm 17.33+/-0.2,,mm 26.5+/-0.2mm 17.33+/-0.2mm 14.8+/-0.2mm 15.5+/-0.2mm. 5.5+/-0.2mm 14.8+/-02.mm 4.0+/-0.5mm 2.0+/-0.2mm ITO-3P-2L 0.75+/-0.2mm. 10.9+/-0.2mm FEATURES MECHANICAL DATA □ High surge Current Capability □ High Forward Current Capability □ Low Forward Voltage Drop □ Glass Passivated Chip Junction □ High Temperature Soldering Guaranteed □ Case: JEDEC ITO-3P-2L Molded Plastic Body □ Terminals: Plated Leads Solderable per MIL-STD_750, Method 2026 □ Plastic package : Flammability Classification 94V-0 Maximum Ratings And Electrical Characteristics (Ta=25℃) Parameters FGF40 Symbol 01 Average forward current, Io at Tc =100℃ 02 03 04 05 06 07 40.0A IF 60Hz, Resistive or Inductive Load Peak Repetitive Reverse Voltage VRRM 50 100 200 400 600 800 1000 Max RMS Voltage V RMS 35 70 140 280 420 560 700 VDC 50 100 200 400 600 800 1000 DC Blacking Voltage Forward Voltage @IF= 40A Non-Peak Forward Surge Current, @Rated VF IFMS 1.1 400A Load Conditions 8.3mS 1/2 Sine-Wave Max. Reverse Current IR At Rated DC IR Reverse Voltage. Tc =25/100℃ Typical thermal Resistance, Typical Junction Capacitance (Note:1) Operating and Storage Temperature Range Rth-JC Cj To/Ts 5.0uA 250uA - - - - - - - - - - - - - - - - 1.2℃/W ------------------------------- ----------------------------------160pF------------------------------------------------------------65 to +175℃-------------------------------- NOTE: 1. MEASURED AT 1 MHZ AND A APPLIED REVERSE VOLTAGE OF 4.0VD.C. FIG.1 –FORWARD CURRENT DERATING CURVE Fig.4- Typical Instantaneous Forward Characteristics Tj=25℃ Pulse Width =300uS 1% Duty Cycle Instantaneous Forward Voltage (V)