25Amp Insulate Flag Pressfit Automotive Rectifiers Data Sheet DESCRIPTION PIFR2501~2506 N/ P MECHANICAL DIMENSIONS INSULATE PRESS-FIT Features NOTE: Low Cost 1. PILFR25XXP Positive (Forward) (+) Cathode To Case,Color Code Red 2. PILFR25XXN Negative (Reverse) (-) Super Cool Long life Features Anode To Case, Color Code Black High Current Capability Electrical Characteristics@25C Average Forward Current, Io at Tc=150C 60HZ, Resistive Or Inductive Load 3.Lead have 1mm, 1.3mm And 2.5mm Symbol PIFR2501P PIFR2502P PIFR2504P PIFR2506P PIFR2501N PIFR2502N PIFR2504N PIFR2506N 25 IF A(DC) Peak Reverse Voltage, Repetitive:VRRM VRRM 100 200 400 600 DC Reverse Voltage, VR V(DC) 100 200 400 600 VRMS 70 140 280 420 Maximum RMS Voltage Max. Inst Forward Voltage Drop. VF at 100Amp Peak Forward Surge Current, IFM(surge): 8.3ms. Single Half Sine-Wave Unit V(DC) VF 1.2 V IFSM 400 A IR 10 uA IR 500 uA R0JA 0.8 C/W -65 to +175 C Superimposed On Rated Load (JEDEC method) Maximum Reverse Current IR At Rated DC Reverse Voltage. TC= 25C Maximum Reverse Current IR At Rated DC Reverse Voltage. TC=100C Maximum Thermal Resistance, Junction To Case (single side cooled) Operating And Storage Temperature Range Tj; Tstrg Junction Capacitance (pF) Typical Junction Capacitance 1000 500 200 100 50 10 .1 100 10 1 Reverse Voltage (V) TJ = 25 ° C F = 1 MHz VSIG = 50 Vpp Forward Current Derating Curve Average Forward Current (A) Non-Repetitive Peak Forward Surge Current 1000 TJ = 25°°C 500 200 100 TJ = 150°°C Amps 50 10 .1 1 10 Number of Cycles @ 60 Hz 100 Single Phase ½ Wave Res. or Ind. Load 50 40 10 30 20 10 5 20 Capacitive Load IPK/AV = 5, 10 & 20 0 25 5 0 7 5 100 125 150 175 Lead Temperature (°° C) Typical Instantaneous Forward Characteristics 1000 TJ = 100°°C .1 .01 .001 60 Forward Current (A) Reverse Current (µ µA) Typical Reverse Characteristics 10 1 PIFR2501~2506P/N 25Amp Insulate Flag Press-fit Automotive Rectifiers Data Sheet TJ = 25°°C 40 80 120 Percent of Rated Peak Voltage 100 Ratings at 25 Deg. C ambient temperature unless otherwise specified. 10 1 .1 NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. 3. When Mounted to heat sink, from body. TJ = 150°°C PW = 300 µs Forward Voltage (V) .6 .9 1.1 1.4 1.7 2.0 2.3 2.6 Single Phase Half Wave, 60 Hz Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.