FR5001 . . . 5004 Series Data Sheet 50 Amp PLASTIC SILICON AUTOMOTIVE RECTIFIERS Mechanical Dimensions Description FR2500 .395 .395 FR2500S .337 .276 .175 .242 Leads 1.00 typ. .05 Dia. Features n LOW COST n LOW LEAKAGE CURRENT n HIGH SURGE CAPABILITY n HIGH TEMPERATURE CAPABILITY n DIFFUSED JUNCTION n MEETS UL SPECIFICATION 94V-0 Electrical Characteristics @ 25o C. FR5001 . . . 5004 Series Maximum Ratings FR5001 FR5002 FR5003 FR5004 100 200 300 400 Volts RMS Reverse Voltage...VR(rms) 70 140 210 280 Volts DC Blocking Voltage...VDC 100 200 300 400 Volts Peak Repetitive Reverse Voltage...VRRM Units Average Forward Rectified Current...IF(av) Single Phase Resistive Load, 60 HZ, TC = 150°C ............................................. 50 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM Surge Supplied @ Rated Load Conditions, ½ Sine Wave, Single Phase, 60 HZ ............................................. 600 ............................................... Amps Forward Voltage @ 80A...VF (Note 4) ............................................. 1.06 ............................................... Volts DC Reverse Current...IR @ Rated DC Blocking Voltage, 150°C ............................................. 2.0 ............................................... µAmps ............................................. 500 ............................................... µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 300 ............................................... pF Typical Thermal Resistance...RθJC (Note 2) ............................................. 0.8 ............................................... °C / W Typical Reverse Recovery Time...tRR ............................................. 3.0 ............................................... µS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -50 to 175 ........................................... °C Page 2-14 Typical Junction Capacitance 1000 pF 500 200 100 50 10 .1 90 75 TJ = 25°°C 500 Single Phase ½ Wave Res. or Ind. Load 60 TJ = 150°°C 300 Amps Forward Current Derating Curve Non-Repetitive Peak Forward Surge Current Amps 1500 100 10 1 Reverse Voltage (Volts) F = 1 MHZ VSIG = 50 Vpp TJ = 25 ° C 150 45 30 75 Capacitive Load IPK/AV = 5, 10 & 20 15 1 10 100 Number of Cycles @ 60 HZ Typical Reverse Characteristics 10 140 145 150 155 160 165 170 175 Case Temperature (°° C) Typical Instantaneous Forward Characteristics 1000 TJ = 100°°C 1 .1 10 .01 NOTES: 1. 2. 3. 4. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Amps mA 100 .001 FR5001 . . . 5004 Series 50 Amp PLASTIC SILICON AUTOMOTIVE RECTIFIERS Data Sheet TJ = 25°°C 40 80 120 Percent of Rated Peak Voltage 1 Measured @ 1 MHZ and applied reverse voltage of 4.0V. Thermal Resistance Junction to Case, Jedec Method. When Mounted to heat sink, from body. Pulse Test: Pulse Width < = 300 µS, Duty Cycle 2%. TJ = 25°°C PW = 300 uS .6 .9 1.1 1.4 1.7 2.0 2.3 2.6 Volts Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Page 2-15